I have an Astro City with a Nanao MS9. The previous owner had done some repairs on the cabinet and had removed the 15 pin AMP-UP connector from the chassis and spliced the wires directly onto the power/RGB lines. I'm now trying to add the 15 pin connector to make future removal of the monitor/chassis easy. I found https://wiki.arcadeotaku.com/images/4/49/Ms9pinout.png which is the pinout for the MS9, but it seems to have 2 wires for the degauss while I have 3 wires (green, black, yellow) for degauss on mine...
update: I mistakenly identified the monitor as an MS8, it is actually an MS9, post edited to reflect this
update: I mistakenly identified the monitor as an MS8, it is actually an MS9, post edited to reflect this
Last edited: