Here is something i wanted to do from when i got my second cab of Virtua Fighter 1.
Basically what i want is to transform my Virtua Fighter 1 cabinet into a multi fighter cabinet, using of course only original model 1/2 boards.
No harms or cuts have been made to the original hardware and on the original harness….
Games that will be included into are:
Virtua Fighter 1
Virtua Fighter 2
Sonic The Fighters
Last Bronx
Fighting Vipers (or Dead or Alive, i have to decide this)
Dynamite Cop (even if it's not a 1v1 fighting game)
Works to achieve this is:
- Transform cabinet into a jamma cabinet.
- Transform boards into jamma.
- Construct some structure to have 6 boards into the cabinet.
- Assemble all together.
So firstly i made an adaptor to transform the Virtua Fighter cab into a jamma one
Then made 6 jamma adapters for Model 2 and Model 1 boards.
Then build a wood structure i can Mount and dismount into the cabinet.
Then i use a wonderful jamma 6-1 switcher from Riddletv with a stereo switcher, since Model1 and Model 2 boards are stereo.
Now this is what i have….
All working just fine (didn't test the audio switch yet) in my test bench.
Start mounting inside the cabinet
Mounting the 6-1 switcher inside the cab
I just have to finish mounting boards into it and play with stereo sound switcher.
All is now inside
Audio Switcher board
Basically what i want is to transform my Virtua Fighter 1 cabinet into a multi fighter cabinet, using of course only original model 1/2 boards.
No harms or cuts have been made to the original hardware and on the original harness….
Games that will be included into are:
Virtua Fighter 1
Virtua Fighter 2
Sonic The Fighters
Last Bronx
Fighting Vipers (or Dead or Alive, i have to decide this)
Dynamite Cop (even if it's not a 1v1 fighting game)
Works to achieve this is:
- Transform cabinet into a jamma cabinet.
- Transform boards into jamma.
- Construct some structure to have 6 boards into the cabinet.
- Assemble all together.
So firstly i made an adaptor to transform the Virtua Fighter cab into a jamma one
Then made 6 jamma adapters for Model 2 and Model 1 boards.
Then build a wood structure i can Mount and dismount into the cabinet.
Then i use a wonderful jamma 6-1 switcher from Riddletv with a stereo switcher, since Model1 and Model 2 boards are stereo.
Now this is what i have….
All working just fine (didn't test the audio switch yet) in my test bench.
Start mounting inside the cabinet
Mounting the 6-1 switcher inside the cab
I just have to finish mounting boards into it and play with stereo sound switcher.
All is now inside
Audio Switcher board
Last edited: