oneleaf86
Grand Master
Recently I've been picking up some TAITO F2 PCBs from YAJ but have noticed that the RGB output is some of the worst I've seen.
I currently have both the short and long F2 motherboards and a bunch of games. Ended up with two copies of Runark/Growl which both show severe ghosting and is the same regardless of motherboards.
Liquid Kids still has a little ghosting but not as much as Runark. It has another issue in which the blacks are appearing as grey which is the same issue I have with a Tengai PCB.
Just wanted to see if anyone out there has the same setup and can test to see if it's normal behavior.
I currently have both the short and long F2 motherboards and a bunch of games. Ended up with two copies of Runark/Growl which both show severe ghosting and is the same regardless of motherboards.
Liquid Kids still has a little ghosting but not as much as Runark. It has another issue in which the blacks are appearing as grey which is the same issue I have with a Tengai PCB.
Just wanted to see if anyone out there has the same setup and can test to see if it's normal behavior.
Attachments
Last edited: