What's new
Hey people
i need some pictures of the bezel and Bezel holder for Mini Cute.
I need very detailed pictures.

Anyone help about it ?
 
The bezel holder is 6 different pieces. It would be easier for me to just ship my extra set to you to duplicate.
I have an extra bezel as well.

Here are some photos I took tonight of half the bezel holder which is 3 pieces.
https://ibb.co/BPZySWJ
https://ibb.co/zJDqTd2
https://ibb.co/0qX17pj
https://ibb.co/QbGR4n0
https://ibb.co/QdVP5sW
https://ibb.co/tMqctbw
https://ibb.co/8Bj7wsR
https://ibb.co/7WfPL3T
https://ibb.co/vQtxDXm
Thanks for your pictures.

Do you think can you ship those parts to me ? or is there anybody can draw that parts with SolidWorks ?
I think these are the best ways
 
Last edited:
Crazy idea hear, but instead of reproducing the cabinets to the point where they're indistinguishable from a real one, why not use a "close enough" color to make them ever so slightly different. I can forsee some chump spending $3000 on one of these because he didn't know.
 
Crazy idea hear, but instead of reproducing the cabinets to the point where they're indistinguishable from a real one, why not use a "close enough" color to make them ever so slightly different. I can forsee some chump spending $3000 on one of these because he didn't know.
They won't have the same monitor mounting, so they'll be distinguishable easily.

Changing the colors would turn a lot of folks off, I'm sure.


And thank you @Solmin for helping! I've been super busy and I was supposed to get dimensions done on these but just keeps slipping through the cracks.
 
Crazy idea hear, but instead of reproducing the cabinets to the point where they're indistinguishable from a real one, why not use a "close enough" color to make them ever so slightly different. I can forsee some chump spending $3000 on one of these because he didn't know.
They won't have the same monitor mounting, so they'll be distinguishable easily.
Changing the colors would turn a lot of folks off, I'm sure.


And thank you @Solmin for helping! I've been super busy and I was supposed to get dimensions done on these but just keeps slipping through the cracks.
I'd be shocked if 10% of the folks who a minicute could tell the difference between mounts.
 
Crazy idea hear, but instead of reproducing the cabinets to the point where they're indistinguishable from a real one, why not use a "close enough" color to make them ever so slightly different. I can forsee some chump spending $3000 on one of these because he didn't know.
I think people want it close to original as possible.
Yes you right about it, this is a replica cabinet and maybe somebody doesnt care about of the originallity . But they think this project is one time production, and they want to see it perfect.
Im trying to do my best to make it %100 original, i dont know will i success but im trying and we will see about it.

Thanks to @rewrite for his incredible help to finished this project. Thanks to @Solmin for his efforts too ;)
 
Last edited:
I really want one of this. If you end up doing another batch next year i am def in for one, so keep me in mind for the next one.
 
I really want one of this. If you end up doing another batch next year i am def in for one, so keep me in mind for the next one.
I havent started the project yet. Please follow the thread for the news :)
Sure. PM me your address. I can pack it up and get it shipped out soon.
Thank you. ;)
Great, that Solmin is sending you these! Sorry I know my pics were kinda dark.
Dont worry about it my friend. It is not your fault. I think the better way to produce it to get an original.
If i have the original control panel and bezel holders, i can complete the cabinet. Thanks to @Solmin for that ;)
 
Once I find a box I will ship it out. I have all parts wrapped and ready to go. My friend is coming to look at the parts tomorrow. He is flying to Turkey to visit family on the 23rd December. IF he happens to be in same town that is a nice option as well.
 
Once I find a box I will ship it out. I have all parts wrapped and ready to go. My friend is coming to look at the parts tomorrow. He is flying to Turkey to visit family on the 23rd December. IF he happens to be in same town that is a nice option as well.
This is the Best news i heard ever.
Yes im in İstanbul and i can pick up from your friend. İt doesnt matter for me where will he stay in İstanbul. I can go every where
If he stays in here a while, i can finish all drawing then give him to back?.
I can make some sanding and painting staff for you :thumbsup:
 
Some good news about of the colors ( powder coat )

I have talked to some company and here is the deal

They can produce the original colors which @Derick2k get them from the real cabinets.

Here are the conditions:

At least 100kg minimum each of colors.
6 Euro for only 1 KG.

That means 1800 EURO total for 3 of colors. I think it is not bad deal.


We have only one missing color code. Waiting your help for PINK ;)
 
Hello people
i need some help about of the Coin mechanism for mini cute

Somebody has to give me some detailed measurements and pictures of the all metal parts for Coin Mech.

thanks...
 
Hello people

Thanks to @Solmin, I got the bezel holder and bezel yesterday. I finish the all 3d sketch for bezel holder today. Working on bezel now.

check the pictures ;)

Yi6P8IT.jpg


HX8zXA2.jpg


uhevy9w.jpg


1YtSu39.jpg
 
Hello people
I have finished the 3D Bezel draw for 19" Monitor.

The idea is creating a 3d plastic model with 3D printer first. Then i will make the mold.
We have to check it firt on the WG 19" Monitor.
@rewrite whats about your WG monitor. Can you get it and check it with your mini cute ?

Check the pictures.

4IahO2b.jpg


izDpJ6m.jpg


ucVgwKG.jpg


7byFSGr.jpg


yAB22y3.jpg


m9F5J2B.jpg
 
I still don't have it in hand. I got it secured, it's just not in my home yet.
 
Back
Top