What's new
By:
Filters

Sega Fan Replacements

XianXi

XianXi

Professional
Joined
Jul 21, 2015
Messages
452
Reaction score
396
Location
Honolulu, HI
Is the Naomi the only system fan that has to be altered (length and connector)? I'm trying to round up a bunch of fans for Lindberg, Chihiro, Naomi, Ringedge etc. for a customer. I saw a few posts but they didn't mention anything about length or connectors having to be changed so am I correct in assuming everything was plug and play as far as system and CPU fans?

Any help is appreciated, just want to make sure before I ship them out.
 
I've seen threads that people have changed them so I know some people know.
 
Order replacement fan with same connection?

I.e. ringedge power supply uses a 2 pin 12vdc. Its the loudest fan so i replace with noctura quiet fan.
 
Aaronr33 said:
Order replacement fan with same connection?

I.e. ringedge power supply uses a 2 pin 12vdc. Its the loudest fan so i replace with noctura quiet fan.
Click to expand...
Right, that's why I'm asking, I don't have any of this hardware so I can't confirm it myself. I asked him for measurements and connector types but no answer so I might just have to send them out as is.
 
XianXi said:
Right, that's why I'm asking, I don't have any of this hardware so I can't confirm it myself. I asked him for measurements and connector types but no answer so I might just have to send them out as is.
Click to expand...


Noctura will have 3 wires two for voltage and one for rpm. RPM is not needed for power supply so you will use only two wires.

Just need to splice the old connector to new fan wiring. If you have it wrong fan will spin backwards.
 
You must log in or register to reply here.
Back
Top