I've been working on this issue over on KLOV, but I thought someone here might also be able to help:
https://forums.arcade-museum.com/threads/k7000-pinched-on-the-right.487185/
In Short, you can see the right side of the screen is narrower than the left (look at the MK symbols). I'll try to sum up what has been tried:
All new caps from arcadepartsandrepair.com
new flyback
Different Tube
Different width caps (c 38 @ 2x .39uf and .33uf
New linearity coill (L2)
Checked r99 & 98 out of circuit, both read 2.2k ohms (correct)
Other suggestions:
check d15 & 18
perhaps aftermarket flyback causing issues?
Any other ideas?
https://forums.arcade-museum.com/threads/k7000-pinched-on-the-right.487185/
In Short, you can see the right side of the screen is narrower than the left (look at the MK symbols). I'll try to sum up what has been tried:
All new caps from arcadepartsandrepair.com
new flyback
Different Tube
Different width caps (c 38 @ 2x .39uf and .33uf
New linearity coill (L2)
Checked r99 & 98 out of circuit, both read 2.2k ohms (correct)
Other suggestions:
check d15 & 18
perhaps aftermarket flyback causing issues?
Any other ideas?