What's new
By:
Filters

FS Xed and Mirko repro Monkeyball banana and harness

For Sale
Well that sucks. Are there other connector that will fit or am I sol
 
you might be able to get away with Dupont connectors but I have not tested them yet.
 
Think I would be interested in a NH Gundam banana... Need to figure out what else I may need to make it work for me...
 
nnap said:
you might be able to get away with Dupont connectors but I have not tested them yet.
Click to expand...
did a quick check and duponts should work. For the analogue inputs you are looking for a 26 pin 2 row dupont. On the 60-pin digital input you only need GND & P1 START, so single pin duponts will work.
 
Interested!

I would be looking at a banana, control panel, harness and yellow start button. I have a SANWA JLK-GF2-EV coming in so not sure if that will work. May be interested in the gundam stick for compatibility purposes? Unless those are the same part. It would be going in a g-balance candy cab with JVS IO.
 
Last edited:
The JLK-GF2-EV is the updated version of the stick. Should work fine. I'll put you on the list for an original design banana
 
Hey guys! Curious if any of you that are ordering parts have played the game yet? I only started playing it for the first time a few weeks ago. Game is so good that it will stay in one of my cabs permanently. It’s too bad it’s not linkable for multi player, would be a fun party game,, with beer, try to drive in a straight line haha
 
Is the gasket the black rubber thing that goes under the banana? If so, interested in one since mine was broken in my kit. Do you have photos? Is the Gundam one compatible with original MB joystick?
 
DragonMinded said:
Is the gasket the black rubber thing that goes under the banana? If so, interested in one since mine was broken in my kit. Do you have photos? Is the Gundam one compatible with original MB joystick?
Click to expand...
Yes it’s the exact same part, they are coming from Sanwa.
This picture is the Gundam stick with our repro banana, they come with the gasket and the ring. If you look closely you can see where they start to wear out, fortunately I haven’t received any ripped ones yet. 4 more sticks are shipping to us so fingers crossed they'll be in good condition or not.

Edit: we’ve been using a complete NOS panel to work off.
 

Attachments

  • image.jpg
    image.jpg
    165.6 KB · Views: 133
Last edited:
Just a few correction out of the Sticks we have I got 1 slightly rip gasket from a Gundam stick. The gasket should be shipping on the 27 from Sanwa, so I'm hoping getting it early November. I was was told 14-27 business day to ship from payment received. I also found some JST RA connector and pins so I will be testing a harness for the Sega and Capcom IO early November. Will update the spreadsheet on pricing once tested good.
 
Mirko said:
Hey guys! Curious if any of you that are ordering parts have played the game yet? I only started playing it for the first time a few weeks ago. Game is so good that it will stay in one of my cabs permanently. It’s too bad it’s not linkable for multi player, would be a fun party game,, with beer, try to drive in a straight line haha
Click to expand...
Not the arcade version unfortunately. I have only played it on the GameCube / Xbox.
 
VoldoJF said:
Not the arcade version unfortunately. I have only played it on the GameCube / Xbox.
Click to expand...
Me too actually (original xbox version) I felt it left a lot to be desired, the controller and the feel of the arcade is perfect.
 
I'll take two sets as well please same , whatever I need to preserve my original joystick.
 
@PlayYing you have a original MB setup? If so does it have the op amp (small pcb)
 
avramce said:
This dealy?
Click to expand...
He said he wanted 2 set to keep his original, I just want to clearly if he has the original setup or not. As he did not specify which of the 3 version of the banana he want
 
You must log in or register to reply here.
Back
Top