What's new
By:

Ikaruga Capcom IO

R

Robertguy09

Grand Master
Joined
Nov 5, 2021
Messages
358
Reaction score
666
Location
Texas, USA
Does Ikaruga not support the Capcom IO? Is there another IO that I should be using instead?

I feel like I've seen a website with IO compatibility before, but I can't for the life of me find it again.
 
Robertguy09 said:
Does Ikaruga not support the Capcom IO? Is there another IO that I should be using instead?

I feel like I've seen a website with IO compatibility before, but I can't for the life of me find it again.
Click to expand...
It should work just fine. It satisfies the JVS requirements for inputs and outputs present. I've used one for it before actually.
 
skate323k137 said:
It should work just fine. It satisfies the JVS requirements for inputs and outputs present. I've used one for it before actually.
Click to expand...
Hmm strange.... Couldn't be something with playing it via the net dimm? I know the io works, I've been playing other games. Ikuruga didn't do anything though.
 
Last edited:
were you playing powerstone 2 with it? There is a switch on the capcom io for 2p or 4p games? Is that possibly in the wrong position?
https://solvalou.com/arcade/naomi

maybe do what that guide says and go into the naomi test menu. see if the motherboard is registering anything but the game is not somehow?
 
KaPH33n said:
were you playing powerstone 2 with it? There is a switch on the capcom io for 2p or 4p games? Is that possibly in the wrong position?
https://solvalou.com/arcade/naomi

maybe do what that guide says and go into the naomi test menu. see if the motherboard is registering anything but the game is not somehow?
Click to expand...
I have it set to two player mode. The strange thing is that the Naomi's input test shows everything working. If I use the input test for Ikaruga, I get nothing.
 
Robertguy09 said:
oh ignore me guys... it just started working after the 3rd try. Didn't change anything... Hopefully nothing is wrong with my hardware, but this is the only game I've seen an issue with.
Click to expand...
maybe double check your ground wiring. If all of the inputs were not registering at once it could be a ground issue. Like a momentary break in the harness or loose pin connections in the interface.
 
You must log in or register to reply here.
Back
Top