MITSU CPS1 Remote Dipswitch Options

[Mitsurugi-w]

The "Bottomer"

Price: $25

This version allows you to simply place the dips on the bottom of the pcb where they can be more easily accessed for multi use. SOLDERING REQUIRED.


Remote Dip PCB with 3 Foot Flat Cable

Price: $45

This version allows you to extend your dipstwitches up to three feet from your multi pcb!! SOLDERING REQUIRED.


Filterboard Mounted Dipswitches

Price: $45

Comes with your choice of 20cm, 25cm, or 40cm ribbon cable. Specify when ordering.

This version allows you to mount your dips directly on the filterboard of your CPS1.5 multi. It uses a sleek design and mini dipswitches to fit snuggle onto the filterboard without being obstructive. With a longer ribbon cable could be mounted elsewhere on a custom case. Professionally manufactured. SOLDERING REQUIRED.

 

[Derick2k]

I'll take 3x of these:

Remote Dip PCB with 3 Foot Flat Cable

Price: $45

Ill send $145 to your Paypal which should cover shipping as well, correct?

 

[Mitsurugi-w]

Sure. Just send me a PM to help me track.

 

[Darksoft]

I need one of these in my life, please.

 

[dos]

HELL YEAH, sending you a PM

 

[LittleLarrySellers]

Sweeeeet! Pm inbound

 

[Kujako]

PM sent.

 

[KRG]

PM sent.

 

[Derick2k]

PM Sent

 

[Roch]

Hi,

I would like to take a "Remote Dip PCB with 3 Foot Flat Cable", I'll send you a PM.

 

[playero]

PM sent

 

[Mitsurugi-w]

They have arrived!

Will begin shipping remaining pre-orders tomorrow!

As a side note I ordered various different lengths of ribbon cables to test. A longer cable allows you to mount these other places than the filterboard. Perhaps somewhere on a custom case?

This uses mini dips so you most likely need a pointy object to help flip the switches. I actually want to challenge someone to design a holster for this so you can pick it up to more easily change the dips.

Also you want to remove the plastic film before using because these dips come in the on position and you need to swap them to off for most dips.

 

[Darksoft]

They look great!

 

[jassin000]

A longer cable allows you to mount these other places than the filterboard. Perhaps somewhere on a custom case?

No screw holes to mount to anything
Double sided tape isn't pro dawg. *fingerwag*

The original remote DIP (while big/bigger) is the winner for custom cases.
YES its important to crown a winner because we can't have 10x different cases designs all supporting different hardware options.
Standards are a thing for a reason, we can't reasonably progress without them.

 

[Mitsurugi-w]

A 3D printed holster would be cool

 

[dos]

You would be surprised what sort of products "double sided tape" appears inside of. Granted it's not the same as the stuff you buy at Walmart, but there are definitely "pro" applications in electronics for a material with two sticky sides.

e: https://www.3m.com/3M/en_US/vhb-tapes-us/

 

[Mitsurugi-w]

I think people will be happy with the filter dips. It's not in the way and it's pretty seamless.

 

[JohnRambo'sKnife]

I am happy with the design. Much smaller footprint and tape is fine - more than secure enough.

 

[Kujako]

Got mine on Monday and just installed.


Used 3M VHB for the dip switch panel, so hopefully I don't ever need to remove it...

 

[slayer213]

Got my kits today. Everything works great!

 

[Mitsurugi-w]

Beautiful!