Taito Vewlix Diamond Replica Project.

[hursit]

Hello guys.
I finished my Custom Vewlix Diamond Edition Cabinet.
I made it by MDF. You can see the all images of the whole process.
The whole process is about 2 months. I didn't work full time.

I design it for PC and PS3 for now. But after Niko Release the Nesica Multi system, i will put my Taito Type X2 main board in the cabinet. And i will wire the all system for jamma.
For now Im just using it with Attract mode Fronted.

You can watch the video:

https://www.youtube.com/watch?v=5MU4wOEq8dQ&t=15s

First 3D Drawing.

Main Case

I draw the all Control Panel layout as Vector graphic with Adobe Illustrator.

More Wood job

Control Panel

Side Parts. Made by 2 MDF (18mm)

Its a small hole for the monitor bezel. It is sliding. It can be remove easily

Back

Fake Nesica Card Reader

These are not MDF. It is wood.

Top Layer. I fiex 6 pieces of MDF then sanding

Monitor Bezel

All Finished before painting.

Lets paint it.
After Paint.

Marquee Arts And Side Arts and Control Panel Before printing.

After UV Print on the Plexi Glass Directly. ( Not Paper )

Lets Bring my home

Samsung 32" TV

Other staff

Metal part for control panel. I put it under the Plexi Glass. Metal is 1.2mm thick. And Plexi is 2.8mm

Hımm Not Bad

I covered the whole Marquee plexiglass glass with Car Glass Film.

Side Arts

Control Panel

Other arts for the instruction panels.

Speakers. (4pc)

Wiring buttons and joystick. I made it as a socket. It will be easy if i wanna change it.

Thats a PC/ps3 Controller.

And Finish

 

[rewrite]

That came out great!!

It always amazes me what people can do with wood!

Just a thought:
Rewiring it for JAMMA doesn't make much sense for the Type X2 as it's JVS. I mean you could totally run something like a Capcom IO over JAMMA to the X2, but it seems like an unnecessary additional step if you're wiring from the ground up anyway.

 

[twistedsymphony]

I mean you could totally run something like a Capcom IO over JAMMA to the X2, but it seems like an unnecessary additional step

If you're going to need a JVS I/O for the TTX2 anyway then why not a Capcom I/O?

I mean you can buy complete JAMMA harnesses that are nearly plug and play. Seems to me wiring a custom JVS harness would be the more time consuming option.

 

[SNK-NEO-GEO]

Ho Lee Fuk - You Sir have mad skills.. Awosome shit man

 

[jassin000]

Great looking homemade Vewlix clone, how expensive approximately was it to construct?

 

[hursit]

I mean you could totally run something like a Capcom IO over JAMMA to the X2, but it seems like an unnecessary additional step

If you're going to need a JVS I/O for the TTX2 anyway then why not a Capcom I/O?
I mean you can buy complete JAMMA harnesses that are nearly plug and play. Seems to me wiring a custom JVS harness would be the more time consuming option.

Thanks for the info. But i already have full Taito system.
I have TX2 multi system with SSD and I have Capcom I/o Board.
And i have another Sega JVS I/o

I think i can make custom adapter for plug and play.
And if you realise that i already made another control panel for the Arcade systems with out Select And Home Button

 

[hursit]

Ho Lee Fuk - You Sir have mad skills.. Awosome shit man

Hahaha Thanks mate.

Great looking homemade Vewlix clone, how expensive approximately was it to construct?

It is about 625-600 usd. İnclude Sanwa parts,Samsung TV,Wires, Speakers,Small Amplifier.

 

[The Spaniard]

Wow, at the top of the post I was totally not expecting it to turn out the way it did. You have great skills to plan and build that. Amazing!

 

[hursit]

Wow, at the top of the post I was totally not expecting it to turn out the way it did. You have great skills to plan and build that. Amazing!

Thanks

 

[kuze]

Wow, that really came out fantastic! Thanks for posting so many detailed pictures, they really show how much time and dedication went in to this project.

 

[deibit]

Impressive skills you have!

 

[Brettster]

Great looking woolix
After it’s painted it looks very authentic well done

 

[hursit]

Great looking woolix
After it’s painted it looks very authentic well done

thanks

 

[atrfate]

nice job, i see someone is running my ui , tho so elements appear broken not sure why. if i had to guess its the bug I found inside the animate module , and you just used the "theme" only install and not the full thing could be worng tho.

 

[PascalP]

Mad skills dude!

 

[hursit]

nice job, i see someone is running my ui , tho so elements appear broken not sure why. if i had to guess its the bug I found inside the animate module , and you just used the "theme" only install and not the full thing could be worng tho.

Its interesting. What kind of elements broken ?.
I think i just set it full. Or maybe i miss something.

And thank for that great theme

 

[atrfate]

The game select area isn't functioning correctly
it should move akin to this.

yours the enlarge/shink commands, and the frame isnt moving.

 

[hursit]

Yeah you're right there is a problem
What is wrong do you think ?
or is there any latest version links or something ? I can try it again and i can re-set it.

 

[atrfate]

i had to guess its the bug I found inside the animate module , and you just used the "theme" only install and not the full thing could be worng tho.

Ie replace you animate folder, with the one out of the full install.

 

[Coyo5050]

Top notch work! My profile pic is of the one I made so from experience I know you put a ton of work in to this!