Recent content by CamoYoshi

Hey all, just a quick heads up; Orders placed on or after October 6th will be delayed in fulfillment since I will be out of state from October 7th-12th. Any orders placed during that time I will try to get packed by the 13th or 14th once I am back into the swing of things. Appreciate your patience!

Copying this from my post on KLOV: https://forums.arcade-museum.com/threads/mrcft-252-flybacks-noisy.566481/ The replacement APAR flyback "MRCFT-252" for many Neotec monitors (in my case, a NT-2702 VGA-only) are very noisy, concerningly so. Here is what mine sounds like...

If you haven't already posted there, you may have better luck selling this on the Arcade Museum forums instead: https://forums.arcade-museum.com/ GLWTS!

https://gitlab.com/fabtek/atari-5763-13376-00-testsvcvolpcb Drop in replacement for Atari Part Number 5763-13376-00. Pull requests and feedback welcome since I am not a PCB design expert. BOM listed in repo, just 4 micro switches and a Molex KK 6 pin connector.

Hi folks, Some changes to the shop recently. I've removed some products that since I've opened, have never sold even once to clean up the main page a bit more. I've also reduced some prices to some items as well. However - Some changes going forward - Free shipping is only available now for...

Yeah the original image is based of a Sandisk Ultra 32GB SD card which has a nominal capacity of 31.8GB IIRC. Where as a lot of other cards out there are often closer to 31.2-31.6GB based on my experience. I wrote a whole thread about it here...

If your SD card is not truly 32GB, you might have issues writing the boot image correctly to the SD card. You can try this one I made to work around that (hosted on a friend's server so no need to worry about Google Drive etc.) https://rou1.m3l.net/wipi_netbooter/

You're going to want a PSU with at least 8A of capacity on the 3.3V rail and 10A on the 5V rail. 12V doesn't matter quite as much, so 1-2A will be fine on that front. The NAOMI does draw about 50-75% of these ratings but you never want to fully load your PSU's capacity the entire time. Aiming...

Hi Grant, I can burn this for you. If you want to send in your EEPROM to me, I'll happily burn it for you for $10, shipping included. Since you're pretty close by should be a fairly quick turn around time as far as shipping is concerned. If you want a new EEPROM I'll have to check if I have...

Hi there, I have sold my initial run completely. If Kande83 can produce more then I'll restock them.

https://shop.fabtekgames.com/products/refurbished-sega-naomi-netdimm NetDIMMs restocked!

Was going to add on that I have both a Raiden II and DX boards, one with a good battery and one without a battery and I have never noticed a difference between the two with/without, even with swapping the battery between the boards. I always assumed it was intended for some sort of use during...

Adding to this now to prevent other people from wasting my time: Don't ask about anything in the background. If you do I'm blocking and reporting you. Fuck off. This is only for this game and this game only. Don't fucking ask. I don't have time for your bullshit.

Now $600

SOLD Area 51/Maximum Force dedicated cab, C+ cosmetic condition but fully working. One side of the cabinet has the art kind of sun faded. Guns track great, monitor is in decent shape with some minor burn, not visible in-game unless you're on a solid color screen. CF card upgrade with Area...