Recent content by GamingDoyle

  1. G

    Sega Model 2 and Model 3 Filter Board Pinouts

    Oh random question but what's with the MIDI on CN4? Is that actual MIDI and some model2 games used it?
  2. G

    Sega Model 2 and Model 3 Filter Board Pinouts

    Thanks! Got this fully working, I have separated the 5v input lined out from my power supply and taken 5v off the jamma edge. Love me some VF2 so I'm super thrilled. Thanks again folks!
  3. G

    Found: Sega Virtua Fighter 2

    Bought off yahoo auctions Japan, thanks
  4. G

    Sega Model 2 and Model 3 Filter Board Pinouts

    I know this is old now, but for the virtua fighter 2 pinout above, are the two 5v CN3 & CN12 enough to power it? what about CN1? Also what is CN14 used for? Thanks!
  5. G

    Sega Model 1 help

    sorry I have nothing on the little dip switches. That’s great you have a 24khz tube though, I went the jamma to supergun route since the only thing I have that I can convert the signal to CRT-wise is a VGA monitor. (Keeping an eye out for medium res monitors). The good news about the jamma to...
  6. G

    Sega Model 1 help

    All right, alternative amp worked! Its interesting though, not sure if its my soundbar or the hdmi arc or the supergun, but something introduces audio latency when going over the jamma edge. Its not a ton but I notice it versus hooking the rca jacks from the mixed output directly to some...
  7. G

    Sega Model 1 help

    Thanks, yeah it sounds like what I tried (small 12v powered amp to boost before feeding to the jamma edge / supergun). Maybe the cheap Amazon amp just isn’t up to the task, I’ll return that and try a beefier one. It’s says up to 18W but it’s pretty light/cheap/flimsy compared to any other amp...
  8. G

    Sega Model 1 help

    Hmm so audio works, kind of. At first I did just line level out of the mixer thinking the tv speakers could amplify it but it was super quiet. So then I tried lining a tiny amp in and it was at least more audible but still kind of quiet and the quality sucked compared with putting the post...
  9. G

    Found: Sega Virtua Fighter 2

    Looking for a full working set of game boards/IO/filter & audio ideally. In a giant cage like my model 1 would be great, not sure how common those are. Had a blast getting the model 1 going and jammified so far and want to do the same for VF2. (I didn’t harm/reuse the wiring harness for that...
  10. G

    Sega Model 1 help

    @ItsBobDudes check it out, I took your advice and am building my own: It works with my supergun for video & controls! Next up will be audio. I’ll probably just go for it, but it looks like for stereo post mixing off the audio board I can use jamma L/10 & M/11 even though original is jamma...
  11. G

    Sega Model 1 help

    Holy hell is that awesome.
  12. G

    Sega Model 1 help

    So you are powering the board separately, and I assume this is a JAMMA cab not going to a supergun so that has its own power but it’s just not wired to the fingerboard? Maybe I will get/build a JAMMA cabinet since sticking all this in my multicade is probably not going to fly and it might be...
  13. G

    Sega Model 1 help

    So you know how I mentioned the screen being washed out and getting fixed by touching the wire so I thought it was my jank rgbs connection? Nope, it’s the GBS. You need to set clamp sp and clamp st in the geometry settings for medium resolution games or it washes out: View...
  14. G

    Sega Model 1 help

    Thanks a lot, I might go jamma and try passing it through my supergun, see what that’s like. I don’t actually have a jamma can so that’s how I would use it
  15. G

    Sega Model 1 help

    I’m kind of amazed this came together. The cage was shipped with cardboard taped to it for packing (kudos to Sega engineers for building a cage that could withstand being shipped like that), the wiring harness came from a dude in the south and the sound board from the mid-west. Now I need to...
Top