Recent content by grendelrt

They are very active on the discord in the first post, I would go that route.

Ended up just ordering the McMaster Carr screws after not being able to find a better version. Can add the STL if anyone needs, height now matches my LS32 in my Diamond Blue and my JLF in my Blast city. left side with spacer

Realized my LS-56 stick is too high in my chewlix, so I made a spacer for it that goes between the metal plate and plastic. Only issue I am having is the screw that holds the metal plate to the plastic is a M3 self threading screw. I need a longer screw around 20mm but have only found it on...

If it has a ; in front of the line that means the line is commented out. You would make sure those lines don't have comments, then when you launch a game you need map player 1 and player 2 in the controller mappings of the game. When you start a game, if you hit a button on p1 side you should...

That could definitely be true, I had a 2931 and 2930 but I think the 2930 was originally installed, thanks for the correction :)

You are welcome, if you are just testing if it will work and not shutdown, you can prob ignore the resistor for now and know the dimness is not an issue, just needs a quick resistor change to fix.

Yes you can, the picture will be too dim though at first. You have to swap out the heater resistor on the chassis. In my notes I have it was resistor 732 and I change it to 1.5 OHM 1 watt fuseable first, then later changed to 2.2ohms cause it was too bright. This was on a 2933 to replace a 2930...

On Mister , go the ini and you had to un comment the merge lines that were embossed on the back.

That's one place 4K OLED comes in handy is its an exact 4x integer scale of 1080P for games that are native, so the display will typically scale it pretty nice. For emulation with CRT Geom or similar shaders it just gives a little more room to do the shaders, but 1440p still looked great. I...

Got my Diamond Blue, here is the thread of what I used to make the monitor mount, should work well with a thicker OLED i think, https://www.arcade-projects.com/threads/cheap-diy-vewlix-monitor-mount.37010/

Found a post on Facebook Vewlix group a while back and saved it , so thanks to the user =AZYwVqUCIzq8ABLTgIx1R_z-2MSVEgC9tz1qSzCt5rAfA7oRlO61AGgv1qE0w5lEuJLzatXZ3E4Qhkl2uwMFV9oWH5zhjco74CYKMp4AtzpdMvF2isqDoCLxhl-PG1NOJEF9wYP-GO4p4iCEunDOOFzY&__tn__=%2CP-R']Tuan Do on FB! His design totally...

I meant the pots on the actual jamma adapter that is used by the mister, I am assuming thats what those are in red. I use the videoamp board on my groovymame setup and once I adjusted the pots on that I was able to get it pretty close. Lol, I have a 203rxi setup on my system for Naomi is one...

I felt mine was a tiny bit lacking in brightness as well, did you try adjusting all 3 color pots on the board up to see if it helped? I need to try it but would like to get a baseline from a real board using my meter first.

I have ordered from Chino before and had no issues, but it was smaller chewlix parts. In general people talk highly of him on the FB groups.

Chewlix is pretty easy to replace the monitor in. There are tons of custom solutions available, but most people just use some simple VESA arms and attach them to the monitor frame. I have run 1440p IPS (LG 32GP850-B/32GP83B-B)and 4K OLED (Gigabyte AORUS FO32U2) , obviously OLED is better but the...