Hey all, Can you flash the motherboard with Chihiro BIOS etc but test in xbox case? I have a spare 128mb xbox v1.0 board I want to setup as a spare without having to take my Chihiros apart.
Ok after a bit more digging the schematic shows the pot wired up to 1-3 on the cn2 connector in the amp. However, the only pins populated 456 and 789. 456 I think for the speaker and 789 for the sub which has a volume pot but doesn't seem to be present and the amp isn't jumpered for it. I tried...
Im sure it wouldn't let me go into the test menu I thought it was something to do with the hack. OR2 seems to work ok and wangan if I turn ffb and card reader off. Saying that you start wangan with the accelerator and although the view change flashes on that it doesn't work when you press the...
My chihiros boot up and most importantly play games quite happily without the AV cable connected as long it's an RGB Xbox selected cable. A composite cable will work also and let you boot but if you try and play anything it will complain. I connected RGB up and to my start TV and it works and...
Hi all,
Again this OR2 twin cab I have missing big chunks of the loom and at the moment I have no sound I assume this is because the volume controls in the coin box are not wired up. So it's just a matter of wiring the pot up to the correct place. Having a look through the wiring diagrams they...
So I tried a few different ways and pretty much found what you did it's always quite wavey and not really very good. At the moment I have one cab hooked up with an Xbox RGB cable to a RGB to VGA converter then from a VGA to rgb converter. Not great but I have only one Chihiro AV cable ATM. In...
Looks like you tried all permutations does the Chihiro output a 15khz signal into the video board ala Xbox with a hacked bios or does it scan double a 15khz output?
It could be the lm1881 doesn't output a h sync and some picky monitors need a clean h signal as well as a v sync. I have a lmh1980 on it's way that provides h and v sync to see if that would do it. Funnily enough I have a GBS 8220 as well cga to vga converter if I hook that up in front of the...
No the Chihiro itself won't do 15khz there is talk of dip switches in the filter board that can be switched to force 15khz but I couldn't make it work also games won't boot with it set to 15khz. The Chihiro has the Xbox signal passed into the daughter board that then turns it into 31khz VGA. So...
Hi all,
You may have seen my other threads about being scammed on an OR2 cab that came with 15/24k monitors not the standard 31k monitors. Anyway I thought fine I will just use my 8100 VGA to cga converter which works a treat on my pc, however it doesn't like Chihiro input I think this because...
Hi all, I have been lurking on this thread for a while has anyone any tips on burning the bin files with the K150 DIY type programmer, i can't load the files straight so I am in the process of exporting them using PG4UW but it still complains of illegal file lengths.
Thanks
Steve