Recent content by Shadoron

C2 - 470uf 16v C4 - 470uf 16v C5 - 470uf 16v C14 - 1uf 50v C15 - 470uf 16v C16 - 220uf 25v C17 - 220uf 16v * Could be 10v, original cap was scratched. 16v will work.

I have a Turbo Force that is also missing the OR-10 sub board. @TheDeath, if you happen to make a couple extra replacements, I'd be more than happy to pay for the materials plus any extra amount you feel is appropriate. I've been holding off on using Hammy's method in the hopes of finding one...

Add me to the list. I'll take one, fully assembled.

I had already put the 16V in, just wanted to get the original value for the cap database(s) here. I should have mentioned that in the original post!

I'm in the middle of re-capping a Denjin Makai II / Guardians PCB. The cap at C17 has a scratched label, and I can't make out if its 220uf @ 10V or 220uf @ 16V. Anyone have the *Korean single board* version of the PCB around, that could let me know? Also, there's two different cap list...

This ended up being the issue. There's an undocumented feature in the test menu that lets you clear the EEPROM, once I did that I can correctly change settings and no more crashes. For anyone else who attempts this: Get yourself a couple 27c240 / 27c4096 / 27c4002 EPROMs with 120ns or better...

I'm not in front of the PCB currently, but I've attached a photo of an actual World version I've been studying against my PCB over the last few days. Aside from the two socketed roms labeled with "MB2", my board is identical. It appears that World and Japan versions share all the same roms...

Just wanted to post an update on this - still having exactly the same issue. Just for clarity: the original Japanese EPROMs on the pcb are Texas Instruments TMS27c240's with 120ns access timing. Even though their numbering is weird, they are in fact 4Mbit EPROMs, just like a 27c4096. Today I...

I see what you mean on sourcing... looks like I'll be going this route. Thanks again.

Thanks for the replies. Yes, I have blank checked and verified the EPROMs both times I burned them. My next step will be to grab some new replacement EPROMs and give them a shot. I had some used 27C240's laying around that I used for the World roms. I was beginning to wonder if they might be...

Recently picked up a Numan Athletics 2 / Mach Breakers Japanese PCB. Looking at the rom sets in MAME, it seems like a pretty easy task to swap it over to the World edition. Basically erase and burn the two program roms, 11C and 11D. I've now tried this twice, and can't seem to get the board...

I have a 95682A-3 board in one of the Capcom metal cages that came with New Generation, and can't see any reason why the 11mm sized caps couldn't be used. They would certainly fit in the metal case clearance. As to your cap values, my board has a couple differences: CC4: 3.3uF @ 50v (not a...

Just received a couple complete sets of control panel harnesses for super neo cabs from L.V. Perfect, and quick turn around. Thanks again!