Recent content by Toyxf

If you use switch.managed switch must be,it can automatically assign addresses（DHCP).

It's ip address issue.Jconfig only control I/O,so sync error was point nerwork.

辣波同学，既然你都已经破掉了系统，那就直接把BIOS也重置了算了。除非你还打算继续用之前的硬盘。 Hey crazyjojo, since you've already broken the system, you might as well just reset the BIOS.Unless you plan to continue using the old hard drive.

This personal upgrade to a NOIR monitor uses a bare screen approach. It features LG LED panel, specifically the LM315WR5-SSA1, a 4K 60Hz IPS panel. It's no casing, only the power supply and driver board. Because there's no casing and the panel is very light, it's secured using a...

If I remember correctly, Korea's 6BR runs online, the card just records the login account, and all information is saved on the server, similar to Tekken TT2 and 7.

The original Tekken 7 hard drive is encrypted with bitblocker and has TPM turned on. Once you turn off TPM, the original hard drive will be unusable(no test). If you can run the game normally using the Parrot, you can bypass these encryption methods and run the non-encrypted game directly. This...

Who's that lucky boy?8o

It doesn't matter, the power supply is 1U FSP（for server use）, you can buy 500-600W products at computer market, and you can replacement it, so you don't have to worry about power consumption.

If you upgradeCPU,the radiator(fan) must be replaced. The original radiator has a very low rotation speed, so I use the low-power I5-3550S as a long-term running device. It is not recommended for high-power devices(I7-3770). And the height of the radiator is limited.

Hi dude,you wanna use NAMCO Carbinet play PC games? I/O use JVS board,yes? My friends have solution,He handmade it. It's support PC only.

It's very useful，I use it for my cab button（translucent）. You can also choose 5V products.

Use 3rd router(tplink,netware,whatever),setup LAN ip address to 192.168.138.1,netmask 255.255.255.0.save. In HDCP menu, setup ip range 192.168.138.50 to 192.168.138.200,netmask 255.255.255.0,gateway 192.168.138.1,save. Reboot router ,connect your machine.

This is a faulty soldering of the graphics card memory and needs to be re-soldered。 Find a place to repair Cell phone can be repaired it.;)

Emm,it's V-Sync issue.