Flain
Enthusiast
Are you sure that’s not a SDRAM or sdcard issue? The RAIZING cores push the SDRAM pretty hard. When I had issues with my SDRAM those were the cores that would crash on me the most.
MiSTerAddons MiSTercade - MiSTer for JAMMA cabinets
- Thread starter ShootTheCore
- Start date
just ordered a new ram just in case....
sLpFhaWK
Enthusiast
did u pull it off the mistercade to verify it worked fine in the stack?
yes. all the cores work OK ... I'm just having these problems on the raiZing cores
ShootTheCore
Legendary
Try joining the Coin Op Coalition Discord and mention it to them. They wrote and maintain the Raizing MiSTer cores.
That's a great bit of MiSTer troubleshooting knowledge to have, would never have occurred to me.
So I’m having a weird problem. When I’m playing any Cps2 games on the mister, if I play 2 player my 2p joystick also inputs on the 1p side. Only the joystick does it and only if I move it left. I have attatched a picture. Any help appreciated.
ShootTheCore
Legendary
That's odd for sure. Try rebinding the controls for that core.
sLpFhaWK
Enthusiast
i would remap the controls definitely.
sLpFhaWK
Enthusiast
so each core u need to set the keybinds for player 1 and player 2. i am not sure how it works on a mistercade yet as mine will be here tomorrow but whatever key combo you use to bring up the menu u need to hit right to go into core options and it'll say remap or something i forget the terminology but in there is wherr you'd hit up left down right l punch m punch h punch, l kick m kick h kick, start, coin and core credits whcih i skip. you need to do that for both p1 and p2 but if p2 is activating p1 commands i have no idea what the cause would be., but try this first.
Flain
Enthusiast
Add this to downloader.ini for Mistercade v1
[misteraddons/mistercade_mappings]
db_url = https://raw.githubusercontent.com/misteraddons/mistercade_mappings/db/db.json.zip
For Mistercade v2 add this instead
[misteraddons/mistercade_v2_mappings]
db_url = https://raw.githubusercontent.com/misteraddons/mistercade_v2_mappings/db/db.json.zip
Then run the update_all script (get it from here if you don't have it https://github.com/theypsilon/Update_All_MiSTer). It'll update all the mappings for your mistercade so you don't have to map anything (except for beta cores and things like that not yet fully released).
Flain
Enthusiast
In the core itself, if you go into the menu and select "reset player assignment" does that make any difference?
Otherwise i'm not sure and maybe the mistercade is faulty. I certainly have a faulty one out of the few i own and its also an input related issue.
Otherwise i'm not sure and maybe the mistercade is faulty. I certainly have a faulty one out of the few i own and its also an input related issue.