Search results

  1. truxpin

    GTi Club 1 cabinet adapted to GTi Club Corso Italiano

    the NVRAM and chd files i used was the ones from mame and this worked for corso italiano never tried driving party as for U3 i believe this is only important for code 1 dispatch and police 911 2 and you should be able to get thrill drive 2 and xtrial racing to run on that cab
  2. truxpin

    GTi Club 1 cabinet adapted to GTi Club Corso Italiano

    I have done this conversion long ago and it works use the manual from thrill drive 2 for the wiring as all the viper driving games are wired the same from memory the orignal gti club steering feedback board wires to the extra edge connector on the viper also the brake accelerator pot inputs swap...
  3. truxpin

    Gear shifter Daytona USA Arcade - How to remove the mounting plate?

    Looks like you nearly got there unscrew the pin sticking out of the side of the shaft remove the e clip holding the plastic block then the shaft will pull out of the plastic block and then come out through the top of the plate
  4. truxpin

    Puzzle Bobble 4 ERPOM changed question

    I doubt it was done in the factory but i am guessing it has been region swapped as the eprom that has been tampered with is the one that usually contains the region byte
  5. truxpin

    FOUND working Sanwa PM1745/27Z21C chassis

    That glass sound a lot like the glass on the pin2k pinballs and you get a similar effect if you put the glass in the wrong way up have you tried flipping the glass over?
  6. truxpin

    About Sega Outrunners

    Never seen a DX Outrunners did they ever exist ? I have seen and worked on a few twin Outrunners and they don't have force feedback as such what they do is shake the steering assembly using a DC motor not sure if this is unique to this game or was used on other games. the shaking happens when...
  7. truxpin

    ST-V CDROM drive replacement for Sport Fishing 2?

    assuming you have a complete machine and have both the game cart and special mpeg board that the original optical drives 20 pin flat cable plugs into your in good shape if not you will need any missing parts not sure if the optical drive from an saturn console will work as i never went down...
  8. truxpin

    DARKSOFT CPS1 Multi - Support thread

    The board is soldered in the wrong place it is supposed to be positioned further down ie the row of empty holes goes where the switch pins you have soldered are and the edge of the adapter you have soldered should be soldered to the row of pins below it hope this makes sense
  9. truxpin

    ST-V CDROM drive replacement for Sport Fishing 2?

    The orignal drive is an industrial cdrom drive uses a caddy to load the disc the problem is that it uses a custom proprietary interface and is complete unobtainium the good news is that the RHEA ODE unit developed for the early saturn home console will work in sports fishing 2 you will need to...
  10. truxpin

    Electronic coin acceptor to Coin mechanism

    connect the black wire to the common terminal and white wire to the normaly open terminal on the coin micro switch leave the red wire disconnected just insulate it up so it can`t short on any thing
  11. truxpin

    Sega Model 2/3 A/B/C - CRX and how I stopped worrying and learned to love the bomb.

    Yes it is true you must have the i/o board connected at least power CN1 and comm CN2 for virtua cop 2 or HOTD to boot without it you ge pretty much what is shown in your picture
  12. truxpin

    Konami Viper - Game swap methodology?

    The only viper game i know of that uses a dongle is police 911 2 and the other game that uses the internal serial number is code one dispatch and the serial is tied to the rtc so if your rtc dies and you don`t have a backup for your specific main board you are screwed this game can only be...
  13. truxpin

    Interest Check: Darksoft Namco System 12 Multi - unofficial

    In in for 2 units totaly worth it just for the gun games the rest of games good too
  14. truxpin

    ANNOUNCEMENT - MMS1 - A 16 in 1 MULTI FOR JALECO MEGASYSTEM1(A) FROM CAIUS + HAMMY

    Please add me to the list for 1 unit I have a p47 that has just been waiting for this.
  15. truxpin

    Does point blank 2 even exists on the Namco system 12?

    I If this works there should be a picture of a system 12 point blank 2 pcb
  16. truxpin

    Does point blank 2 even exists on the Namco system 12?

    Finally Had a chance to find the system 12 point blank 2 pcb set and take some photos just need to work out how to post them in the mean time the main large bottom pcb silk screen text is ( SYSTEM 12 MOTHER (B) PCB ) the paper label on the bottom ( GNB5 VER.A ) top pcb ( COH-700 Sony part #...
  17. truxpin

    Does point blank 2 even exists on the Namco system 12?

    Point Blank 2 definitely exists on both system 11 and 12 as i have both and they play identically
  18. truxpin

    Official Interest list for Namco NA System Multi by Hammy (PCB design by Caius Arcade Repairs & Engineering)

    Any chance of being added to the list for 1x DIY kit as i finally found a good donor pcb thanks
  19. truxpin

    Compatible gun I/O boards for ninja assault?

    No it is a totally different beast for a start it has to handle 2 guns and looks quite different to the time crisis I/O that can only handle 1 gun.
Back
Top