Search results

  1. Ignignxkt

    Single repeating beep at boot screen x3 multi - no boot into os

    I went through a LOT tonight. But it’s all done. I’ll go over it later.
  2. Ignignxkt

    Single repeating beep at boot screen x3 multi - no boot into os

    Put the old GPU in. Seems that works. Assuming it’s driver issue. Control panel plugged in via usb doesn’t seem to be registering. But I do have my keyboard and mouse working. Going through the read me, atm…
  3. Ignignxkt

    Single repeating beep at boot screen x3 multi - no boot into os

    What does a single repeating (every 20 sec or so) beep mean while showing the boot screen? Bios and hdd updated by someone else. All I did was swap in a 1060 gtx which is clearly working to display an image. Bios was already updated. Any help is appreciated. All connections seem good inside...
  4. Ignignxkt

    Is this cable for power or data? (Nesica card reader)

    Didn’t work. Plugged 4 pin from cab onto the board, figured that would work for sure. Nothing.
  5. Ignignxkt

    Is this cable for power or data? (Nesica card reader)

    I also have the two pin ground plugged in.
  6. Ignignxkt

    Is this cable for power or data? (Nesica card reader)

    Will this work or kill my cab? Found matching P4 and C labeled connections. Plugged those from daughter board harness to cab wiring loom. Plugged only connector from card reader to the one on the daughter board loom.
  7. Ignignxkt

    Ignignxkt's Vewlix Diamond Black Build!

    Yeah sorry I knew that. Haha.
  8. Ignignxkt

    Is this cable for power or data? (Nesica card reader)

    So basically, I’m not using the card reader at the moment but was hoping to at least for now get it to light up. I wasn’t sure what this cable did. The other coming off it is a four pin that looks like it plugs into this daughter board I’d prefer to not have hooked up for space reasons (and the...
  9. Ignignxkt

    Ignignxkt's Vewlix Diamond Black Build!

    Interesting. I'm not sure what came stock on it, but the newest firmware available seems to not give me any issues, though my guide button fixed itself before without the need of a firmware update, so who knows what's going on haha.
  10. Ignignxkt

    Ignignxkt's Vewlix Diamond Black Build!

    I agree the Brook adapters aren't exactly 100% reliable, but in regards to how they communicate, this was on automatic switch, with the PC using the Xbox Series/One mode and the Xbox 360 using the 360 mode. I only manually switched these modes later to determine whether or not each controller...
  11. Ignignxkt

    Ignignxkt's Vewlix Diamond Black Build!

    So I ran into some problems. I installed my home, select, L3 and R3 buttons yesterday. Initially they weren't being recognized by Steam's controller test. However, inexplicably, after some time they kinda just showed up. Fine, I figured, not a problem. Even after restarts, they worked, and they...
  12. Ignignxkt

    Ignignxkt's Vewlix Diamond Black Build!

    Namco system 246 arrives: View: https://www.youtube.com/live/9ZUbdecgQHQ?si=ssxzNhGSW1tA3wEq
  13. Ignignxkt

    Ignignxkt's Vewlix Diamond Black Build!

    Good news. While the screw hole mounts were extremely far off, the shape of the unit was the same. And thanks to the mounting plate pinching the enclosure to the control panel it honestly makes zero difference that the control board can’t be screwed down. There’s no wiggle or anything with this...
  14. Ignignxkt

    Ignignxkt's Vewlix Diamond Black Build!

    Oh geez, I didnt even realize you didn't make it for a Vewlix. I'll double check when I get home to see if it remotely matches up.
  15. Ignignxkt

    Ignignxkt's Vewlix Diamond Black Build!

    Summary of new stuff so far. 246 comes in Tuesday! Will likely live stream that. View: https://youtu.be/G43Va7o6FZs?si=EDQtw8y3frOU_H6k
  16. Ignignxkt

    Ignignxkt's Vewlix Diamond Black Build!

    Dummy panels are forever safe. Four buttons to come!
  17. Ignignxkt

    Vewlix Diamond Black/Orange Control Panel Backlighting Mod

    If you ever try it let me know how it works.
Back
Top