Search results for query: *

Yeah - when I made those small updated boards @twistedsymphony the extra tariff charges made it go from about $30 (for 25) to $50 (for 25).

And here are the adjusted gerbers I used.

Ok - pcb's got here 1 day earlier than expected... Thankfully - the fit appears perfect! As I said before - just the horizontal and vertical positions are slightly tight, but it doesn't affect the switch at all. I have 2 to pack up and send off - let me know if anyone else would like some - I...

CPS2 is here - https://jasenscustoms.com/pages/cps2-case-assembly-general-overview CPS3 is kind of in the purchase page - but its literally just screw down the board. - https://jasenscustoms.com/collections/arcade-board-cases/products/capcom-cps3-arcade-pcb-case

Yeah - that was what I was hoping to do - ALL i really need is that little metal disc. I can glue it down.

Looks like my new boards arrive on Wednesday... I will report back late Wed evening!

Hmmmm yeah - that does sound like a lot of challenges... :) I know the laser is good - RIGHT now. Still surprised there isn't a Sega CD ODE yet....

Thanks - I just got these - $8, not bad.. :)

I did create a new version of the PCB that has it shifted up by maybe 2mm - it should allow an install that is centered. Once I get the boards, if they are good - I will upload the gerbers here.

The little metal disc looks like this.

Pretty sure its this "2-10" part. "Chuck Sheet"

Hi Folks, I have a Sega CD Model 2 that I want to work - but the disc won't spin correctly - after a bunch of googling, etc. and looking at different repair blogs - I think that my unit is MISSING the metal ring on the spindle, that engaged with the magnet to spin the disc. I have looked and I...

I have a conquest card, but no MC3 adapter. If anyone is in Orange County, CA and has an adapter I could borrow I am more than happy to pay for shipping to me, or if close enough, I can just grab it from you. Matt

I have ordered some more PCB's that hopefully will be a better placement for the Jasen case. More to come later this week - I have 2 orders queued up for that. I will report back likely later next week! Thanks @twistedsymphony for the primer on Kicad!

Not sure which chip you need - but I needed one a bit ago and was able to program it - maybe this thread has some info for you. https://www.arcade-projects.com/threads/cps2-pal-bgsa5.32927/

Ok - with some washers to lift it a little, and some holes moved down - it's good enough I think.... at the 0 position and 4 position its a little tight, but works fine. I now am going to build a little 3dprinted jig so I can drill the new holes in the right place.

Ok - I will try this - I think I can use some washers to make the selector fit just below the hole, so it might be usable.

8.8 x 9.8

Looks like this one would be correct? https://www.digikey.com/en/products/detail/grayhill-inc/94HBB08T/726316

yeah - you are right right... its a little smaller - but I think it has to be moved back a bit on the board to fit in the opening for the jasen case at least.