Search results

  1. ShllShockArcade

    Home Arcade System

    Yeah it doesn’t matter the Molex connector you choose a long as they are connected up appropriately 👍🏼 RGBGnd and Sync
  2. ShllShockArcade

    Home Arcade System

    Worked perfectly and was really simple to solder. Please forgive the sync line … I ran out of the Molex connectors so I just did a simple .062 crimp connection to get it to work at the time 😊
  3. ShllShockArcade

    Home Arcade System

    I did
  4. ShllShockArcade

    FS Sega Pitfall 2 Triforce Lindbergh Karate Champ Raiden2 Lethal Enforcers NVS4000 Etc..

    Interested in Lethal Enforcers depending on shipping cost to US. PM’ed 👍🏼
  5. ShllShockArcade

    Primal Rage - Supergun power issues

    I gotcha, got to work with what you’ve got 👍🏼
  6. ShllShockArcade

    FS Primal Rage PCB Enclosure - Preorder/Interest Check

    Y yes you are correct that is the entire intention behind the JINX adapter board (changing out the location of the start and attack button). I really want to try the 2.3J rev now 🤩🙌🏼
  7. ShllShockArcade

    Primal Rage - Supergun power issues

    A 10 ohm resistor is a lot different than a 1k ohm resistor also …. Who soldered this resistor back in for you? And why didn’t they test the bird after their work was complete? Very Odd 🤔 glad it works again though 🤙🏼
  8. ShllShockArcade

    FS Primal Rage PCB Enclosure - Preorder/Interest Check

    Going to have to look into this 2.3J Rev! That sounds awesome! Thanks for the heads up! 👍🏼
  9. ShllShockArcade

    Primal Rage - Supergun power issues

    If it’s missing a 1k - 1/8 watt resistor I would purchase a set of these and replace accordingly. I’m a guessing this isn’t your problem though but you never know 🤷🏻‍♂️
  10. ShllShockArcade

    Primal Rage - Supergun power issues

    Interesting thing is the document you show has a 1k ohm resistor but the picture of yours shows a 10 ohm resistor … I can’t make out what the other board has in its place, it’s too blurry.
  11. ShllShockArcade

    Primal Rage - Supergun power issues

    About the multimeter. Ok then the safest approach would be for you to back the power supply all the way down while powered off and then power it on and slowly increment it up while monitoring the +5V line until you hit between 5 and 5.10 volts. Then take a look at your -5 and +12V and make sure...
  12. ShllShockArcade

    Primal Rage - Supergun power issues

    Where on the board is R152 located? Any of us could take a look to see if it exists or not 👍🏼
  13. ShllShockArcade

    Primal Rage - Supergun power issues

    Start by testing your new power supply under load. Do you have a crummy board that you can test with? Plug the power supply in and read the +5, -5 and +12 volts.
  14. ShllShockArcade

    FS Primal Rage PCB Enclosure - Preorder/Interest Check

    I totally forgot you were even making these!!!! Now that’s an added bonus for sure! Thank you! 🙏🏼🤙🏼
  15. ShllShockArcade

    FS Primal Rage PCB Enclosure - Preorder/Interest Check

    Looks great by the way 🤙🏼
  16. ShllShockArcade

    Ninja Gaiden very low sound

    Hey guys, Anybody run into their Ninja Gaiden displaying very low sound? The sound effects and music are all there but very low. Replaced all of the electrolytics and the sound amp but didn’t help at all. Have a pack of Yamahas YN2203C’s on their way but don’t think this will solve the problem...
  17. ShllShockArcade

    Primal Rage - Supergun power issues

    Man that poor little guy even had his pad torn out 🫣 hope this works out for you and fixes the problem 🤞🏼
  18. ShllShockArcade

    FS Primal Rage PCB Enclosure - Preorder/Interest Check

    Dude I’m surprised you can fit this thing in an Arcade1Up! 😵 but how cool of an idea 🤩👍🏼
  19. ShllShockArcade

    FS Primal Rage PCB Enclosure - Preorder/Interest Check

    I’m digging the black on red aesthetic too 🤩✌🏼
  20. ShllShockArcade

    FS Primal Rage PCB Enclosure - Preorder/Interest Check

    Well guys, beginning to end not a tough process. Even without the manual yet 😆 Ran into a hiccup that was no fault of the creators. My board is missing the standoffs that separate the main board from the sound and video boards 😵‍💫 out of nowhere the creator said he could help me and 3D printed...
Back
Top