mathewbeall
Champion
Has anyone made a simple 8 pin minidin cable for the HAS to connect directly to a WellsGardner 7400/7500 monitor?
- Thread starter RGB
- Start date
ShllShockArcade
Enthusiast
I did
ShllShockArcade
Enthusiast
Worked perfectly and was really simple to solder. Please forgive the sync line … I ran out of the Molex connectors so I just did a simple .062 crimp connection to get it to work at the time
Attachments
mathewbeall
Champion
ok cool - I will add it to the list of things to buy... 
Although my WG has a longer connector - not that 5 post one you have.
Although my WG has a longer connector - not that 5 post one you have.
ShllShockArcade
Enthusiast
Yeah it doesn’t matter the Molex connector you choose a long as they are connected up appropriatelyok cool - I will add it to the list of things to buy...
Although my WG has a longer connector - not that 5 post one you have.
RGBGnd and Sync
My 3.2 manual says SW1 toggles CSync output between A (Regenerated) and B (Buffered).
cruzlink2
Professional
Thank you.
