Search results for query: *

Aloha, I work for a school in Hawaii, and we are working on a project for the kids that will show some history of the gaming culture; while also allowing them to sample the games. We are looking for anything that was from the Composite out generation, so basically ps2/dreamcast/xbox and before...

Is this just Rom swap? Wondering if anything else would be needed? I have a twin winding heat cab.

Aloha, I have an Zenith tube with a universal chassis in it; it's currently running a naomi board. As you would expect the colors and focus are less than desired. Cab came this way, I'm considering switching the naomi to my Net City, and converting this back to Jamma, what chassis would work...

Got a twin Winding Heat cab, right cab works great left cab doesnt. When I put it on the bench, it turns on for like a half a second, 2 digit display shoes 88, then powers off. Followed by ever 8 seconds it flickers 88 again and just repeats. Any suggestion on where to start ?

Aloha, picked up a time crisis II (single) on the cheap, got a new pink gun for it, fixed some damaged wires, finally getting some sort of signal, but the gun is very sporadic. Monitor needs a lot of work as well, but if anyone has any pointers please lmk. Gun only shoots in a horizontal line...

Just picked up a project, the left side is working very well, crisp monitor, controls are working etc. Right side doesn't seem to be powering on. No neck glow either, but the board's fans are turning on. And sometimes the view button on the right will illuminate. Thought maybe it was playing...

Wondering who can make me a custom CPO for a project I'm working on, needs to resemble a DIA Black vewlix, thanks!

Long story short, I have a Neo Geo 4 slot in a converted Tekken 5 cabinet with a sony trinitron as the monitor (RGB Modded) Everything worked fine. The color blue was going out and traced it down to a bad connection on the RGB Bread Board I made. Well I wasn't paying attention when I put it back...

So my Raiden II was going nuts on the audio, so I ordered some replacement caps and an LA4460; Replaced the caps, but the LA4460 I couldn't get to desolder well. I'll be honest, it was 2am and I should've just stopped and continued the next day; I ended up lifting a few pads. The pads weren't...

I apologize for being so new to using this. It worked perfect for fixing som MC27C1000 EPROMs but when I tried a D27C512D I kept getting a bad #28 pin; I assumed it was a software thing, but the write process only goes to 12.5% then fails. Is this a user error or a bad chip ? I’m sure I’m...

Getting a loud audio whine when I adjust volume on my Raiden II board. Any suggestions on how to go about fixing it ?

Aloha, Dual Board PCB swapped to SD; getting a few issues, When I selected area51 I get a watchdog reset, after 10 minutes or so I get a watchdog reset, and while it's working theres graphic glitches. Please see attached link for vid. If anyone has any suggestions plz lmk. Maybe a corrupted...

Dual Board PCB swapped to SD; getting a few issues, When I selected area51 I get a watchdog reset, after 10 minutes or so I get a watchdog reset, and while it's working theres graphic glitches. Please see attached link for vid. If anyone has any suggestions plz lmk. Maybe a corrupted rom...

My afterburner II just showed up, but theres some graphic issues. I read on a few posts that I'll need to most likely reprogram some of the chips. Anyone have any experience in this and wheres a good place to start? I dont have a programmer or eraser, but what better time to start than now. I...

Aloha, finished this odd cabinet running a sony trinitron RGB mod on it. Picture is decent but the blank space in the corners are crooked and cropped in areas. Neo geo 4 slot. I used a 1k resistor on the sync line but maybe that was incorrect ? Blank spaces disappear when on other inputs. Any...

Looking to replace this T-Molding Also if anyone knows where to just get a regular vinyl black bezel like the one pictured for a dynamo HS-5 please let me know.

Looking for a SF2 Panel that hasnt been completely destroyed lol, I need 2 panels technically

Picked 2 of these up for $100 each locally in Hawaii. Going with the laminate job, things are going pretty smoothly so far. Had a lot of raised edges from water damage, got them sanded down and adjusted. Was curious though, does anyone know if the front panel where the coin door is can be...

I’ve seen some conflicting things on the internet, was bare knuckles (streets of rage) available on the system 18? Has anyone seen it?, I don’t think I saw it on the multi list but maybe I’m missing something.

Any recommendations to get quality artwork for restoring a Dynamo HS-5 to Hyper Fighting?