Search results for query: *

Not sure if NOS repro is a thing but here we are. Found during a clear out. No Egrets but a few rare birds. One of each available. Konami Domy Jr. - £50 Capcom Impress - £55 SNK Super Neo 29 - £60 Irem Madonna - £60 Capcom Q25 - £65 Q25s were a bitch to make with the glass...

I got tired of having to go in the back of the cabinet to swap USB and HDMI connectors between systems and wanted a way to change them more easily without using electronic switchers. I found a spot to the right of the 12v PSU in my Dia Blues that normally wouldn't get used for anything so I...

Sanwa JLF-P1 plate with modified mounting holes to fit a Seimitsu LS-56 / LS-56-01 Allows you to use a Seimitsu LS-56 / LS-56-01 in a arcade cabinet panel / fight stick that typically has a mount to fit a Sanwa JLF & JLF-P1 plate. I've uploaded the files to Printables.com [here].

Super simple one this. Adapter plate to allow a Seimitsu LS-32 or LS-32-01 to be fitted directed to a Taito Vewlix control panel. Once fitted, the CP > underside ball distance is approx 24.5mm. The standard SE or SS mounting plate can be removed and the printed adapter plate fits directly to...

Arcade related project.... it's at least being used to make arcade parts ^^ I've used one of these type of fume 'extractors' for years, I think I got it from Maplins... It was OK but you had to pretty much have the hood right over what you were doing for the fume to be pulled in. So, I put...

Little job done for @Monstermug He's got a Sega Prologue 21 system but his speakers were missing the badges. I was sent a couple of photos of an original part with some rough dimensions: Moddeled them up from scratch and they didn't turn out too bad: I modelled a hole in the back so that...

Updated version of a kit I used to make. The kit plugs into the CN401 (Vertical) and CN501 (Horizontal) connectors of the MS9 chassis. Flipping the switches reverses the polarity/image: This is useful for games that are output 180 degrees from 'standard' and can not be rotated via dips...

I've moved things around in my office recently and I've put my MX7000 under my desk to free up some room. I don't have a lot of spare room on my desk for consoles and I got a bit tired of having to keep shuffling them around so I made a rack to utilise the vertical space I have below one of my...

Got a few of my repro marquee holders going spare: 1 x Capcom Cute 2 x Jaleco Pony Mark III 25 One of the Ponys has bolts, the other doesn't, If I can find some I'll include them. Just pay shipping. A charity donation would be nice if you see fit. All three have been claimed.

Working title... I need 12v and 5v output in my Vewlix's for a few upgrades and control panels. There is a 12v feed from connector P4 but there is no 5v source in my Dia Blues at all as there is only a 12v PSU. I've made an enclosure to tap 12v to two 3 pin JST XH connectors and I'm also...

Dual PCB spacers: Details / files on [Printables.com]

A lot of you probably already know the stellar work and service that Spectre has provided in supplying marquee art for various cabinets. I asked him about supplying artwork for Vewlix cabs and he said he would gladly do so if there was enough interest. I know there are a lot of guys on here with...

View: https://www.youtube.com/watch?v=_VZbB9OYr5A I stumbled across this game the other night and it's ace :D I starting playing it on my Steam Deck but soon found out you can play using a MIDI controller so I picked up the recommended Hercules Inpulse 200 controller which makes it way more...

View: https://youtu.be/gOLqzECWqs8 The Vewlix Universal Monitor Mount (VUMM) is a kit that has been developed to allow the user to fit a modern aftermarket display to a Vewlix arcade cabinet. Monitor Compatibility. So far, the kits have been fitted to the OEM monitor assemblies listed in the...

I've modelled this up ready to make some .dxfs from and thought I would share a .stp in case anyone finds it useful. I've attached it to this post. I'll posts the links to the .dxfs in my [thread with marquee holders/control panels in] once exported.

I finished this recently and thought some of you might like to see. Finished picture first: So, earlier last year I picker up a couple of DE10 Nanos. I originally ordered a RMC MiSTer Multisystem to put one of them in but after hearing cools thoughts on the one he bought I cancelled the...

Coin Reject Credit Button Kits - For various cabinets. Vewlix example below. See further down the post for other cabinets View: https://youtube.com/shorts/HUzZV7lNRdw Allows you to use the coin reject button to add credits. The terminals piggy back onto the OG levered microswitch so you...

I've got two Vewlix Dia Blues with P32L050 monitors. A few months back one of them stopped displaying an image. Power etc to the monitor is fine and it's powering on and I know it's at least getting a signal as you can see the displayed input resolution via the OSD but no image is displayed. I...

Has anyone got one of these PCBs, or a broken P32L050 from a Vewlix Diamond Blue to take one from?

Vewlix Ashtray Stopper. Taito part number F9008240A Printed with 2.8mm holes which will work with either the original 3mm self tapping screws or any M3 machine screw with a thread length between 4-8mm. I printed the part with the top face aligned to the bed so as to achieve a better...