Search results for query: *

Long story short, between my Blast CIty JAMMA ground, and cabinet ground (cables screwed to the floor) goes 170V AC live, and I would like to fix this. This whole thing started with MiSTercade remote, since I always got small electric shocks from the remotes metal casing when I touched it and...

I have had this extra cart for years but until Fluffy got these couple of custom PAL/GAL chips reverse-engineered it did not work. But now it does! Game is fully re-capped, cleaned and has new u14 and u15 chips installed. It has original label. Some of the plastic taps has been reinforced...

I got a Finlux CRT from a friend to be a backup TV for my retrogaming. I have a similar one already with the same tube (Philips A66EAK071X11). I started it to test it but it only gives this horizontal line :/ I could not find the schemantics for this model (SN71V1) but what I googled about...

So let's get the good news out first: After almost a year of hunting, we finally found a bigger house! It's and old " after war" house which was the type we were looking, and it has had all the major renovations done recently (plumbing, electrics, sewers, subsurface drainage etc. ) so only some...

My PS2 has some controller problems and got tired of setting JAMMACON all the time to my BlastCity, so I'm looking for a real_deal Cave Mushihimesama PCB. Can be boxed/CIB too but plain PCB is also fine. For trade I have freshly cleaned and re-capped quality Philko bootlegs: R-Type Legend Of...

I have a TiT board which have had these weird horizontal stripes from the beginning. At first it took some time for them to appear, but now they come straight from the start. See the video to get a good idea of the problem. Game itself plays fine. View: https://youtu.be/6QRoZYrTnP0 What have...

First and foremost: I did not invent this or had anything to do with R&D of it. This open source product is designed by @buffi so lets give credit where credit is due! This is awesome little pease of hardware which splits RGB video and line level audio without interfering the game signals from...

I have my IGS PGM working fine, but for some reason coin button does not work on it. When I was playing with HAS and external joystick, it was not that big of a deal, but now when I have the Blast City I would like to get the coin mech to work with it. Right now "service" button adds coin and...

So I had this Oriental Legend cart which had graphical glitches all over it. Game plays just fine but graphics are garbage. I'm not that much of a beat 'em up guy, but since I got nothing better to do i decided to give it a go. Boot screen at first At first I checked all four EPROM's agains...

Basically any version or kit can be potential if the price is right! Ideal would be 1.5 full kit, but just loose PCB suits me too. Also "Another version" could fit my needs, so let me know if you have any for sell. EU location preferred due the high customs outside, but if good set in good...

I was offered this Power Instinct pcb. It says Atlus on it and JAMMA edge seems to have the key, but seller told me that he does not know if it is a bootleg or not. I have seen different kind original US PCB, but could this be some other country variant? Or is it clearly bootleg?

So I got Vimana with original Japanese marquee art. Noticed later that the poster has some pen writing on it. I had my friends wife (she is Japanese) try to translate what it says. She was not complete sure, but guessed it might be signed by "Imamatsu". I then went to Wikipedia, but it seems...

I bought this in two pieces and at first it worked just fine. After a while it started to glitch so I recapped it. Then it worked again and played it through once. Now when I was thinking to sell it and tested it, those glitches are back... :cursing: Well that been said, I kind of lost all...

I bought all three conversion from sheep_nova and they worked just fine in the beginning. But now my ddp has developed some kind of graphical glitch :( I have cleaned all the contacts with IPA and I have the better version of IGS PGM which has contacts on both sides. Tried to reflow some of...

I just bought an original Tekken cabinet (First cabinet ) but it's missing the marquee. So if anyone has extra, or sees someone selling it, please let me know :thumbup: I know there are few kind of marquees but I am mainly looking for one exactly like in this picture.

I recently bought these two from different sellers and both were sold in good working condition. And they were that! I have a custom that I usually just test the board that it works and then recap it. I have had so many faulty capacitors on my retro consoles, some handle them better and some...

I got this "untested" Bee Storm and it seems to have something wrong. At first I just cleaned the contacts and it booted to red or grey screen. Once I got it to boot on this weird symbol. Today I started to work with it properly so I - Opened it up. Cleaned the contacts good and checked them...

I bought a Tengai PCB from this forum and got a video where it is up and running and it all looked good. Today when the courier got me the PCB, first thing I noticed is that it misses a large capacitor ?( I mean, this is usually stuff you inform when you are selling boards or is it custom in...

I got this bootleg MK1 while ago. When I connect it to my HAS supergun, it pulls some current, but OSSC says NO SYNC || I have fully re-capped it and tried to look for any broken traces or legs, but don't see any. Today I measured those cables that go from JAMMA +5V to the board. They seem to...

My "wanted" topic! EU location preferred, but if the price is right I'm willing to go over seas. :thumbup: Arcade PCB (No bootlegs): - Mortal Kombat 2 Mainly looking for a good condition stuff, but cheap pcbs with low sound, flickering picture (basically if it looks like a "old capacitors"...