Search results

Looking at doing a small run of Vewlix CP shipping brackets. But trying to figure out reasonable cost and if there is any interest out there for these?

Looks like I had the 12v PSU on one of my Vewlix C cabs die. Any one have luck repairing these, or better to just replace? Input power is good, everything visually looks good (caps, solder joints, etc), but nothing on the output lines. So no fan or JVS power etc.

Sad to say, I got bit by the wonderful tube explosion bug! Looking for anyone that may have a potential 29" tube that I can pick up to bring this bad boy back to life. Doesn't need to be tri-sync but that is an obvious plus. Ideally, located around CT/NYC area for local pickup...

Who ever said don't sell overseas? Just passed off a Hadouken Vewlix mount to @Kiljon91 and he was great to sell to. Communication was great, no hassle, and patient while I was sorting out the shipping details. Happy gaming on a fresh screen @Kiljon91!

Anyone tried this swap before? Couldn’t find any posts.

Both my Blast City cabs didn't have covers for the Comm port so decided to make a cover as I learn 3D printing. Two M4 x 10 screws are needed to hold it in place. Link to Thingiverse.

Recently picked up a MVS U4 which has a Toei TC-HV25LMK chassis. I haven't worked on one of these chassis before, and frankly can hardly find anything online about it so wanted to start a thread to post what I see and find. Initial Findings: Lots of adjustment pots, but in hard spot to reach...

Another Aero City restore thread! Took me awhile to get setup for this project, but we are now off. This Aero is the sibling to @opt2not s epic restore (thread here). He did the heavy lifting and picked up both cabs for us, and then shipped it to me! My cabinet is a little rougher, but hope to...

Looking for a Taito Spinner. If you have one in storage and want it to go to a good home, hit me up.

So have a Nanao 2931 with a solid buzz. Seems to be consistent with this thread well covered by @ekorz. Looking forward to seeing what I find inside the yoke but suspect some crisp convergence strips or something. https://www.arcade-projects.com/threads/nanao-ms-2931-buzz-fixed.10712/ Here is...

Just getting started on this issue but any initial guidance is welcome. When powered on the attached picture is what I see. Is this a common display for a known issue like RAM? Steps so far: Worked without issue for past year Checked voltages and all check out Tried swapping carts out and...

My TTX2 motherboard is sick, and needs help! So I was adding a case fan for my TTX2 Rev.00B motherboard. After plugging it in and trying to boot, original PSU died. I swapped to a known good ATX PSU and got some sort of power cycling issue. Motherboard LED stays on all the time, but the CPU fan...

@XtraSmiley for the win! Connected up with him when he saw a board I was looking for. Great communication, super easy to deal with, fast & well packed shipping, super clean board... what else can you ask for. Hope to deal with again.

@skate323k137 rocks! Helped me out with some burned chips. Hope to repay the favor and hook him up on the future.

Starting a standalone thread for this, but I started the discussion recently. I am looking at a custom order with Southtown Homebrew of Red Shockboxes. I have been wanting some for my PGM carts. It would likely be an order of 100, but wanted to see what the interest was out there as I only need...

I have a Taito Rev.00B motherboard that needs a recap. Does anyone have a list of the capacitors for a recap? Couldn't find it on the forum, so hoping someone has one to share.

Any help pointing me in a direction on my F3 graphics issues? Have tested with a cart and mult with similar graphics issues. Most issues seem to be on background and text. Not character sprites.

So admittedly I am newer to the pcb repair scene. All suggestions and guidance welcome. My new Dragon Spirit PCB is causing me heartburn. Initial boot: Switch DIP1 to test: Switch DIP1 back off: Issues: A) when board boots there is no audio. B) honestly not sure what chip is RAM6 C)...

Does anyone have a suggested fan replacement for the fan inside the DDP DOJ metal case? https://cavedb.com/wp-content/uploads/2016/09/Dodonpachi_Daioujyou-4.jpg

So I was looking atpicking up a Sega JVS I/O Board Rev. B. In doing so I came across two versions;838-13683-92/93. Visually I see a diode on the bottom of the *-93 board. Notsure what it does to be honest. Are there any other known differences betweenthese two versions? Detail pics in the doc...