Search results

  1. hindered

    Nanao MS-2930 won't power on sometimes

    Anyone have any further thoughts on this? I'm mostly interested in the "won't power up" issue.
  2. hindered

    Nanao MS-2930 won't power on sometimes

    Also I forgot to mention: I adjusted the bright screen / flicker issue out so it doesn’t occur anymore, but the picture is now a little dimmer than I would like. It’s usable but I’d like it to be brighter.
  3. hindered

    Nanao MS-2930 won't power on sometimes

    I’m unsure if the issues existed before the cap kit, the monitor was pretty janky before recapping so it didn’t see a lot of use. I’m not sure what SMD means in this case (surface mount?) but I replaced all through hole caps including the ones on the daughter card. If you mean a surface mount...
  4. hindered

    Nanao MS-2930 won't power on sometimes

    I have a Nanao MS-2930 that I did a full recap on, including the big filter caps. It's still experiencing two symptoms, that may or may not be related. 1: If the brightness / sub contrast / contrast are turned "too high", the screen will whine and jitter and shake when trying to show a mostly...
  5. hindered

    Blown out audio from right channel

    old thread, but there’s also a small white volume pot on the stv mainboard.
  6. hindered

    DARKSOFT [OLD VERSION] STV Cartridge instructions and trouble shooting

    I tried a different SD card (pilfered from my Switch) and so far it seems to be working well (only tried two flashes, but so far so good). One thing I noticed -- the SD card (especially the new one) gets physically stuck in the SD port.. like it inserts/injects fine, and it ejects fine...
  7. hindered

    DARKSOFT [OLD VERSION] STV Cartridge instructions and trouble shooting

    Hmm I'm not sure wtf I'm doing differently now, but it works. Same SD card w/same loadout as yesterday. Popped out the SD card, booted up into whatever game was on the cart. Turned off the game, changed the jumpers, put the SD card back in -- working as expected through several flashes :it is a...
  8. hindered

    DARKSOFT [OLD VERSION] STV Cartridge instructions and trouble shooting

    Windows 10, formatted as FAT32, copied using 7zip
  9. hindered

    DARKSOFT [OLD VERSION] STV Cartridge instructions and trouble shooting

    So, today I turned on my blast city and Astra Superstars booted right up - one light, directly into game, no flash needed. Can somebody look at my process to see if I'm messing something up? I have not yet soldered the reset wire, though I plan to once I have the cart working satisfactorily...
  10. hindered

    DARKSOFT [OLD VERSION] STV Cartridge instructions and trouble shooting

    I read about someone who had a similar problem to this before buying the stv multi cart, but now I can't find the thread. Sorry in advance if this is a known thing: I've got a known working STV Mobo (works fine with my authentic Dynamite Deka cart) with multi-bios installed. I have a naked...
Back
Top