Search results

Just got a Naomi 2 that was said to be working with the gd rom but it only plays Naomi 1 games fine and has a checkered ( it was green / black checkered, didn’t catch it in the pic ) pattern and is super slow in my initial d 3 I shoumd go and change out those ics mentioned first yeah?

Got a buddy locally to print the overlay for me easy peasy 😁 the cab is cleaning up nicely while I wait for parts to come in I got some small repairs to do on the front bezel (plus it’s yellowed to shite,that won’t stand) Here are some monitor chassis pics also (forgot to take previously) Also...

Glws! I wish I could find a empty aero, I got a monitor waiting to be put into on

In the first pic, what is the big 44 pin ic?

Here’s the hacked up old cp. picking up a 6 button panel locally and I’ll just need an overlay for it. Where could I get one?

Just a fluke out of no where that it came up locally😅 if it’s available in the come weeks still I’ll take it. Bought most of the things I need so far, gonna check yaton for the coin mech

Pin fixed but it didn’t make any difference. I also noticed this little guy is busted and a pin is gone from this 7474; is that normal on m92s?

Heck noo, the monitor was coming up with nothing but a red line on one side so I got a nice deal.

Looking for some sega net city / universal parts : -Whole wiring harness (bought from chriszhxi) -The sega io board that sits in the control panel (bought from chriszhxi) -The board with the red square buttons that also sits where the io board sits (bought from chriszhxi) —-The whole coin...

The three fuses. One of mine was dead on startup; after changing icp1 it now just cycles over and over. Apparently there was a problem with the molez connectors on the us models so that’s what I’m checking next( info incase someone else is in the same boat)

Sweet, I’m trying to find the blue that’s missing on my tekken right now , Thanks for the schematics !

I’ll take this! But I dont need the metal tray , I have that Pmed

Good idea, but I haven’t taken a single picture of it yet 🤣 tomorrow morning I will:)

I put the chassis back in and fired it up and got a picture! It was too sunny to see anything so I waited till after my footy match to check and dial in the picture. It has that weird like still on the right side. When I adjust the h size , the picture starts to get squished on that side. Why...

I forgot to take a picture but the monitor was turning on and only had a red line on the right side , no picture. So I took it apart today and started the disassembly and cleaning. Check this soldering :/ a lot of wires were just twisted together , like the vga to Jamma wires 🤦‍♂️ I took the...

I found this sucker locally and it looks like it was the stand up version that got chopped down ( I see the black marker on the bottom of The legs where it was cut). It has been hacked up with a Jamma harness , some power supply to run the Jamma ( thank god the sun psu is still in there ) and...

I just revived my slave side card reader. Check. These three fuses : hz1 , hz2 , icp1. If you have nothing happening then icp1 could be dead. I just changed mine and the thing came back to life. Now I have a connection error 🤪 the front motor is just cycling , opening the front and closing it...

Good call, yeah It does change similarly but a lot worse with the whiting effect. The grinding pen is coming out first to see if I can reveal this busted leg🦵

Reseating ics on the b board; one had a pin bent back and not going into the socket (this changed nothing when corrected) and the one mask rom has the ground (?) pin broken clean off. would that mask rom be for sound or for something to do with my colour issue?

Thanks! Got it recapped and now my picture is stable and theres deafening radio silence instead of squealing :) I also got a funky colour problem