Search results

Last of my boards for sell: TMNT 4 Player - $450 MK 2 working sound board and kick harness - $350 Bad Dudes - $75 MVS 1 w/Samurai Showdown cart - $125 $14.00 flat rate shipping per board FF or 4% for paypal fees All boards work and where tested today.

OK - before we start off. Here is the issue + all troubleshooting steps done SO FAR: Issue: Machine Boots up, loading screen states 3 cabinets linked, current cab is #2, #3 is present and Master is missing THIS IS FALSE.. No machines are linked at all. Troubleshooting steps: Factory Restore...

Picked up another dynamo this week and I am putting xmen vs street fighter into it.. I need another Control Panel - this one in is pretty much unable to be salvaged HS-9 *I measured it at 23.75" across on the current control panel Looking for a replacement - Street Fighter button layout, and...

FS: California Speed Located: Riverview FL Price: $700.00 Works great - needs a new header graphic and marquee lamp. I will throw in the CF card adapter if you want to get a CF card to replace the hdd at some point. https://drive.google.com/open?id=1eysh1VOypmHETLR587onT5sKpcb3yJB3

For Sale: MK4 working 100% Kick harness marquee (Cracked) Whole kit for $400 or $350+ shipping and paypal friends and family shipping is $14 flatrate in the cont us https://drive.google.com/open?id=1-p4UPfT2-dq8ZeoAWUUrkKtMGowEFlut

https://drive.google.com/open?id=1-i2956fBD7yeo404vX45CMA_RzdcmwXJ Photos ^ there Global VR madded Arcade works great, monitor is crisp - sound is awesome 3 of the 4 sticks no longer return to 0 / center bought it for a friend -but it wont fit up his stairs looking to get back what I paid or...

https://drive.google.com/open?id=1-B4jCZorZnhKyBoYGyd_N31GJ5NCaltp Newly capped chasis, reflowed, new remote board gun recoil works (a little light on player 2 side) new pots player 2 new bomb button player 1 player one vertical is a little choppy - going to work on the pots for that tonight...

Photos Here: https://drive.google.com/open?id=1-gKqmYzptOPfpDyLZyI0RCTnFo2yd3Kt Working T2 Main Jamma PCB only - $250 or best offer + shipping

Some Misc Parts I have for sale: I will be adding more this week Photos Here: https://drive.google.com/open?id=1-gKqmYzptOPfpDyLZyI0RCTnFo2yd3Kt - Dynamo 25" Corner Cut Control Panel (2 player, 3-button layout) + plexi/lexan precut - Crusin' series board mount w/ link adapter and upgrade...

Not 100% sure I want to continue working on it. $300 with board and everything you see here.. missing monitor and original owner took out the original controls. Board was working before monitor went out - no reason to think that it isnt now. Most wiring is there except the monitor to...

https://drive.google.com/open?id=1-VjflGL6hXFmu3kHIZT8A7dMqMoMl1iB the labels say k7000 but it doesnt match the manual. I pulled it out of the machine due to a vhold issue.. the connections LOOK right on the board and seem solid.. not sure where to start..

100% working Lethal enforcers with OEM Blue Justifier Just tested - both work great though the gun trigger spring is aging and isnt as snappy as it could be. asking $150 + shipping https://drive.google.com/open?id=1YBhy1EFnZlNRYG_HFtLloEjdxoajEt0k

Hey -- I just picked up a DK JR without a monitor.. locating a Sanyo seems to be like pulling teeth.. what would be a suitable drop in monitor for a DK / DK JR? I am about 40 seconds from dropping a pi with LCD inside this cabinet and calling it a day.

Untested as the monitor went bad in the machine and the owner pitched it - trying to mame the cabinet. Board worked great... Looking for $225 or best offer. *BOARD ONLY* Photos here: https://drive.google.com/open?id=1-QPIx_QBSkKj3oOugvAktF_n8n19j7Es Will sell the whole cab in current...

FS/FT: located in Riverview FL Dynamo Control Panel 23 3/4" wide corner cut. includes both control sticks, and three buttons each player.. Not included the 1/2 player start buttons.. (could substitute other buttons if needed); no wiring.. just the buttons and the microswitches.. If local...

I have a cheap little burner that can do the gal22v10d-10lp however it WILL NOT burn gal22v10d-15lp I am in need of at least 1 single gal22v10d-10lp chip - must work and need it in the next 3 days. $10+shipping for anyone that can get me one.. or I will trade 2 - 15lp for 1 10lp thanks

Looking to get a CP for a Dynamo (19" I believe) with SF II Layout - with graphics would be preferred. https://drive.google.com/open?id=1-58NiikhYWRZT2xutlY1lN4Fn109Mmqr photos of the cab currently.. I want to make it a SF II but the cp's current layout is fubar and I dont think I can convert...

I am picking up a 2 Player X-Men this week with the standard 054544 sound chip issues. That should be an easy fix.. how hard is it to change it from 2 player to 4 or 6? what roms are needed to be swapped - trying to get the parts ordered in today so that by wednesday/thursday I can start...

Would it be possible to switch a TMNT to a simpsons? so I have tmnt 4 player.. but I have an original simpsons cabinet.. I was thinking of refurbing the cab.. but I dont think I want to spend $400 on a simpsons pcb - when I spent $40 for a TMNT that i have had for years. Thoughts? Possible?

Picked up a T2 in a lot.. was told it just needed a new power supply - but some testing proved that was wrong - the cabinet works great when I put a SF board into it.. so I put the T2 board into my SF cab - and NOTHING.. Its getting power, one of the LED's is lit up.. but that is it.. the...