blast city

Hi Guys, Recently dropped in my Sega Blast City chassis for repairs at my local arcade repair shop - he mentioned the existing flyback was finished on the MS2930 board. I found an ebay seller located in Spain that is selling aftermarket flybacks for the 2930. Does anyone have experience in...

Hey Guys, Bit of a newbie here - I was hoping someone could point me in the right direction in terms of what wiring I require for my new Sega Blast City Control Panel. My old CP was for 2 Players - 4 buttons per player only. The new updated CP I have purchased now has 6 buttons per player. My...

Hi Guys, Would anyone know what this part is called that sits behind the Marquee image at the top of the Blast City? Mines showing heat decay damage and would like to replace the part of possible. Cheers.

Wanting to buy Guilty Gear XX Control Panel to suit blast city cabinet. Looking for the one in the attached pictures. (Sol Badguy) If anyone has one for sale, please let me know 🙂 Thanks 🙂

I picked up an extra Blast City Control Panel Housing a while back. Never hurts to have an extra, but I'm mainly planning to use it for Monkey Ball so I don't have to swap out hardware on my Blast and can also use it on my supergun. I think it had been "restored" in China; some components seem...

Hi, I am currently restoring a Blast City cabinet. I am looking for a suitable condition blast city topper, as the current one I have is cracked. Happy with either... a topper with original inserts or just the the hard plastic topper without the inserts. I am located in Western Australia, I...

I've been slowly disassembling and cleaning my Blast City. The inside of the front and back smell pretty strongly, and when I first left it on for about two hours, it made the room stink for a week. I'd really like to get it as clean as possible while I have it apart. So far, I've sprayed Krud...

The bottom panel on my Blast City has a couple pretty substantial rust spots that I'd like to clean up. I got some of the gunkier stuff off with a little steel wool, but the bigger spots need something more powerful. Any suggestions? The kick plate isn't rusty, but I plan to polish it with some...

I'm taking apart my Blast City for a cleaning, and I have everything but the two connectors under the coinbox (pictured) removed. All the wires going to the IO board are still ziptied together, so I'd prefer to leave the other ends alone and just disconnect these two connectors. Any advice on...

I've been using a Vessel Megadora 980 Impacta P2x100 #2 to take apart my Blast and it's been working great on all the screws so far. It's too long to get the ones that hold the coinbox door in place, so I got this piece of shit Hozan JIS-4 JIS Screwdriver Set with a couple shorter screwdrivers...

It's a bit tight, but I was able to mount both a CPS2 with a Darksoft multi and a Naomi 1 with Sega IO and @Lemony Vengeance 's CPS2-Sega IO adapter on their own wooden boards and fit them (individually) in my Blast City. Figured I'd post some details here if anyone's ever looking for resources...

Somehow mangled the USB port on my Naomi 2, any suggestions? Anyone have a digikey link for the part. I would love to repair rather than replace the filter board. Pics https://imgur.com/a/Zh7rONv

Hey everyone. I recently ordered some panels from Alberto and had some Blast City 100Yen stickers included to help anyone out in the US looking for one without having to pay the international shipping fees. I have 10 left, price is $8 each plus either stamp shipping or $3 for tracking, PayPal...

Got a cab with an MS9 recently and the monitor seemed DOA. Took it to PNL and they got it back online but now it doesn’t maintain geometry and if you push the image right on the remote board it starts to collapse on its self -the displayed image is noticeably crushed/ more narrow to that side...

I'm taking the monitor out of my Blast to clean everything, so I want to discharge it. I have a high voltage probe from BK Precision. I connected the ground clip to the metal on the chassis and put the pointed tip under the anode, but didn't get any reading on the probe or hear anything. I...

Hi everyone. I'd please like a little help getting my Naomi 2 set up with a CF reader dimm board i got from axunworks. So I run a little game/music/collectibles shop in socal and I have a small arcade section for guests to come play. I bought a blast city just to run a Naomi 2 board...

I just got my first cab, a Blast City, from GndZero, and nothing happened when I tried powering it up. I've turned both the switch on the back of the power supply and the one inside the control panel to on, and I have a bypass loop from Lemony connected to the PCB door shutoff. I connected my...

Friends, I have a very happy problem: I have a new game in the garage, and no room left in the house for another cabinet. The solution? Put it somewhere else. long story short: I recently decided to put some of my cabs up in a local game shop for the local fighting game scene to enjoy, and have...

I'm interested in buying my first cabinet, either an Astro City or a Blast City. I'd prefer local pick up in the greater New England area, but I'd consider shipping from somewhere in the US. I know they can be tough to come but, but if anyone is selling or has suggestions for places to buy one...

I recently installed an internally powered subwoofer inside a Blast City and will be installing another identical setup in another Blast due to the great results. If you can find an Ativa D-1051A 5.1 stereo system yo might pick one up. You only need the subwoofer and not the speakers (I found...