midway

Heya folks! Time for another easy one! This is the second in a trio of posts I've made on working on my NBA JAM T.E. The other two posts can be found here: NBA JAM T.E. Cap Map NBA JAM T.E. Conversion to S.E NBA JAM T.E. is a Midway T-Unit platform game, and in my case, consisted of the...

Hey guys. I bought a midway wolf unit board about 2 months ago with pretty much mostly empty sockets. Looked like a parts board, so I took a chance and figured I could program everything missing and hope to bring it to working order. So, after programming and installing all the EPROM/PIC...

Hi everyone, I’m looking for some advice. I have a Midway Wolf Unit UMK3 arcade board. I installed Any 64 ROMs with WWF WrestleMania, and the game runs perfectly — no issues at all. However, I cannot enable Free Play mode. The board still has the original UMK3 security chip, and the ROMs are...

Looking to buy a Cart Fury IO/sound board with the boot and sound roms. Long story short, guy offered me his Cart Fury cab, and when we took it apart, the sound board wasn't working. Upon inspection we found out it was an SF Rush 2049 board. The video card and CPU board are intact and seem to...

I picked up a Midway Vegas PCB a while back and found quickly that it's not really meant to run outside of a cab due to cooling and the multi-part pcb. To solve this I designed a case to hold the PCB and allow cooling fans to be mounted. This should support both Vegas and Durango CPU boards...

Edit: This is still relevant for posterity, but if you really want the best and most complete TE i'd suggest to use the SE version i built instead. https://www.arcade-projects.com/threads/updated-release-nba-jam-tournament-edition-se-5-02.28249/ View: https://youtu.be/oSpfWZElr84?t=80...

I'm currently working on a rebuild of an NFL Blitz 99 cab. I do not have the coin door apparatus and wanted to use arcade push buttons to activate "Coin Count 1" and "Coin Count 2". When wiring up some buttons to test (appropriate jamma slot and grounded) I can get things like "Test", "Service...

Helping a friend revive this Smash TV I have it hooked up in my NEO-GEO cab (with a JNX adapter). PSU is a confirmed working Meanwell MWP-606, so no issue there. I've turned up the PSU so the PCB is reading 5.05v at the Jamma edge (measured on the board) PCB won't boot and I don't notice any...