supergun

Greetings, friends. Some years ago I purchased a HAS supergun, version 4.1. But due to heavy taxation here in my country, I was unable to get certain cables to make everything work. After a few years, I finally have some spare money to put back into the hobby. I'm looking to make a cable that...

I'm using an Axunworks RGB-2YC RGB to S-Video converter, but I can only get it to output 240p. My goal is to get a 480i signal.I've done everything I can think of as far as dip switches go. It's either 15khz at 240p or 32lhz which shows up as a scrambled mess obviously. Is there anything else I...

Hello, I would like to ask if it would be possible to introduce a supergun to an analog video switch setup without causing problems. I have a minigun which uses the model 2 genesis scart cable + Meanwell RT-125A PSU and a Crestron CEN-RGBHV12X8 RGB Matrix Switch. I would like to have the...

I bought a Meanwell RT-125A power supply to use with my Vogatek MK II supergun and a Pit-Fighter PCB, but I don't know for sure which terminals are for the GND, -5v and +12v lines. Could someone please help me identify these 3 lines in the image below?

$120 shipped to the US For sale a neat CBox supergun. It does have USB encoders integrated - similar to Undamned, same latency (tested against a pair of undamned I had in another supergun). Buttons can be configured via the same method, press 3 buttons when connecting then map (but not saved...

$300 $250 $225 shipped in the US. Bought this supergun during the pandemic and it's been sitting on a shelf ever since (I think i've turned it on maybe 4 times just to test it). Never got around to actually using it since I bought another cab at some point. Tested working via RGB cables & 8pin...

The Real Phoenix A/V amp for custom superguns, COMBO AV EX++, PANA, or Boardmaster Overview I’d like to share a solution to attenuate RGB and audio levels in a custom supergun, or to fix the output from various Japanese superguns. This PCB was generously put together and open-sourced by The Real...

HI all, I'm getting a super odd thing on my HAS, the P1 and P2 buttons 6's are always active. I have tried my own wires from the A board to the has AND the official HAS kick harness - still happens with both I have tried using different A boards and different games. - still happens I have...

Hi everyone, I wanted to ask if anyone has an idea about what might be these graphical errors with my CPS2 stuff: I have my boards connected to the supergun and running at 5V I cleaned the Jamma edge with DeOxit the A board looks like it's in perfect condition, but I know that doesn't really...

Howdy all. A while back I bought a few Undamned PS3/360 decoders from Paradise Arcade and had JammaNationX wire up one of his Atlas boards with the power needed to use them. Got the adapters and plugged em into the Atlas board and the corresponding wires, but I don't get full signals from them...

HAS V3 for sale. This was rarely used. Comes with 3P4P adapter, CPS2 kick harness and CPS2 3P4P harness. Power cable has been modified to plug into a molex 9-pin arcade power supply. No power supply included. What you see in the picture is what you get. Asking $180 plus shipping PayPal F&F or...

Greetings everyone! Today I wanted to showcase an absolutely amazing design from the legendary @Frank_fjs <3, the Minigun Supergun Advanced Edition v2.5 (9-pin Minidin version)! I'm making a batch for a few friends and myself, so as usual I wanted to offer my services to the family at Arcade...

Hi everyone, So I see a lot of nice pre-built superguns online that cost around $600. I bought this cheap(but probably still overpriced) one on Yahoo Japan, it works fine, but it got me wondering what are the nicer superguns doing that this one isn’t...

Hello friends, Finally got my hands on a very clean CPS3 3rd Strike setup, including a NOCD cart of 3rd strike. Grew up playing 3rd strike on DC and it really became a holy grail of arcades if you could find one to play. There are 2 goals for me: 1. Play 3rd Strike in the OG format, hopefully...

I'm looking for two USB to DB15 converters for a Minigun. They have to be compatible with Brook boards (Retro and whatever's in the Snack Box Micro). Axunworks and USB2DB15 are options, but something that ships from the US would be ideal.

Hi Guys, I have a cbox MVS supergun, runs great with external atomiswave, MVS and igs pgm. Today i tried to connect cave esparade Jamma PCB and I can't get a picture out of the PCB when using rgbs via scart to ossc to HDMI. It doesn't like the signal. I had no issues with the same configuration...

Shipping to EU only. For sale these PSU cables for Minigun Supergun and early Pacogun prototypes. Since I now use a 2x4 connector I won't need these anymore, they are brand new without any use. Gold plated crimp tins for lower voltage drop and better wear resistance Raychem 16AWG tinned copper...

Hello all! Relatively new here and new to owning arcade hardware. If this isn’t the correct place to post please let me know. Recently bought a super gun 3.0 (blue one being advertised) and having trouble getting my bottom 3 buttons picked up on my cps3 on 3S test screen (lk/mk/hk) through the...

I have an older model HAS supergun for sale. Includes 3P/4P expansion board. The power cable was modified to work with a standard 9-pin molex "box style" arcade power supply, rather than a screw-terminal. Video cable not included. (But one is typically not included with the HAS anyway) What you...

Ive been working on my own supergun design for a few years and its finally coming together. I'm calling it the Winchester and the goal is to create a supergun that is compact and functional by itself. The features are: Component video encoding LM1881 sync cleaning THS7376 video...