What's new
By:

Aero City - flooded, forgotten, found.

Nice job! I always appreciate the minty restores. I prefer a little patina on my cabs but minty restores are so beautiful to look at.
I like that you put on all the finishing touches like the decals for the headphones and volume control. I still gotta do that for my Aeros.
 
PASTBLASTER said:
Absolutely beautiful work!
Click to expand...
Cheers @PASTBLASTER
opt2not said:
Nice job! I always appreciate the minty restores. I prefer a little patina on my cabs but minty restores are so beautiful to look at.
I like that you put on all the finishing touches like the decals for the headphones and volume control. I still gotta do that for my Aeros.
Click to expand...
Thanks, yes agreed. I’ve got a good mix now of machines that were in need of a resto and ones that just need a tidy up and clean.
 
Here’s the control panel area tidied up and a before and after shot of the screws holding on the glass. I wished the Torx ones recessed properly into the washers - but they didn’t so I found some glossy PH ones instead. I also have four castors on the bottom now so I can roll it around.
IMG_4212.jpeg
IMG_4213.jpeg
IMG_4215.jpeg
IMG_4216.jpeg
IMG_4217.jpeg
 
Last edited:
Ziggy Cheetos Dust said:
Alright, finally some progress today after coming home to some long awaited items. The new castors and leg levellers arrived from DeJapan. Both bought from Rakuten. A big thanks to @erzane for guiding me in the right direction and knowing the part numbers for these items. These are identical to the originals.
IMG_4127.jpeg
Click to expand...
Can you share the part number.
 
I’ve got the machine inside now out of the winter cold garage. I took a quick pic here but have had to move it into a bedroom because there’s no room left 😓
IMG_4238.jpeg

I previously had permission from my wife to block the lounge room door - as below, but not any more. I tried it on but it didn’t fly this time. 🤭
IMG_4233.jpeg
 
Last edited:
You must log in or register to reply here.
Back
Top