What's new
By:

Arcade PCB 3D Printed Cases!

Gnet case is done!
I'll post the models later tonight.

1000004460.jpg

1000004458.jpg

1000004461.jpg

1000004462.jpg

1000004463.jpg

1000004457.jpg

1000004455.jpg

1000004452.jpg

1000004453.jpg
 
Mageta the Lion said:
Let me guess, no love for Viper Phase 1, Senkyu & Co.?
Click to expand...

I plan to make a case for the v2.0 PCB also (which my Viper Phase 1 is on).

I don't have a motherboard for my Senkyu at the moment, so idk when I'll make that.

But I'm uploading generic cases for both V2.0 and V2.1, so anyone wanting to print them can just add the side text in their slicer if they want it.
 
I tried to make a snarky remake that you can't switch Modules 🙃
But honestly some nice stuff here, makes me really look at my Prusa Mini with disdain 😵‍💫
 
Mageta the Lion said:
I tried to make a snarky remake that you can't switch Modules 🙃
But honestly some nice stuff here, makes me really look at my Prusa Mini with disdain 😵‍💫
Click to expand...
I considered designing it so that the games could be swapped. I tried a few designs, but didn't like how any of them looked. Plus I personally like having a dedicated motherboard per SPI game.
 
Nice work! ( i checked of the prices of the saibu games... phew ...)

Sadly the elegoo neptune 4 max sucks. Throwing it out the window right now. - Will wait 1-2 months if bambulab will release a XL printer. Prusa is nice but the XL is really expensive :( ... will post pictures of the printed case whenever i find a working XL printer :)
 
Robertguy09 said:
Well that is unfortunate! I heard the max was decent. What issues did you have with it?
Click to expand...
I think the Elegoo Neptune 4 Max is hit and miss to get a "nice" working machine. - i was unable to level mine to get a a good first layer - Tinkered with it over the last couple of days (owning 3D printers since a few years ... ) with no good result. Sent it back today
 
Last edited:
I had to buy another SPI board when mine died, and it's coming with a Fighters cart that has no cover. I went looking for a cover, to see if I had to design one, and found yours on Printables. Thanks for your hard work on that!

Still thinking to do another one so I can do embossed-like labels on it, and I'm thinking about central supports on the cart connectors to minimize stress on the cart and PCB when swapping games. Have you considered that? Something to keep the board as flat as possible and reduce flex. After having to repair my mainboard twice in a year, I'm super wary about these things. =/
 
I did a case for the SPI carts which is on printables. If you want to tinker with it, I can send you the fusion360 file. Send me a PM with if you want it.
 
nnap said:
I did a case for the SPI carts which is on printables. If you want to tinker with it, I can send you the fusion360 file. Send me a PM with if you want it.
Click to expand...
Ah, it was yours I saw. Printables put it on the same page, I thought it was the same creator as the other. My apologies for the confusion. Your System16 shell is pretty dang cool too. =D
 
You must log in or register to reply here.
Back
Top