PascalP
Legendary
Arcade PCB 3D Printed Cases!
- Thread starter Robertguy09
- Start date
HardAzRockz
Enthusiast
That look great! Can’t wait to print. Thank you so much!
Last edited:
clintkolodziej
Enthusiast
Wow this is awesome! I had seen your cases before but couldn’t print them on my Ender 3, I really appreciate you splitting them, now I can have a nice case to protect my GNET.
HardAzRockz
Enthusiast
Any chance you could make a shell for 2 slot Neo Geo? Maybe remix this one to fit https://www.printables.com/model/899411-open-mvs-advanced-printable-case-remix-for-thread ?
Robertguy09
Grand Master
Sorry I don't have a 2 slot neo geo pcb on hand, so I'm going to have to pass.
Scarletspeedstr
Enthusiast
Thanks for making these and sharing them. I went white on the G-Net as well. I’m currently working on logos to apply to your Namco design. Thinking of doing a Soul Calibur in a dark metal blue.
Robertguy09
Grand Master
I'm happy to share and happy that people like my designs
@xterc @Scarletspeedstr and anyone else, if you print any of my designs, please share a make on my printable models. That way I get them points towards another printer I don't need LOL.
xterc
Student
I did post on X (Twitter or whatever it calls itself today) at https://x.com/antongale/status/1925682373347168503 , but I'll share the make too shortly. Thanks again!I'm happy to share and happy that people like my designs
@xterc @Scarletspeedstr and anyone else, if you print any of my designs, please share a make on my printable models. That way I get them points towards another printer I don't need LOL.
Robertguy09
Grand Master
First prototype for the spit case design for a gnet! (Printed in all my random scraps lol)
I think I over did it... This thing is a tank
. It's the sturdiest case I've made.
There are a few areas I need to adjust. Mostly minor aesthetics and ease of assembly things. I might also try eliminating some screws and add some sliding joints.
I think I over did it... This thing is a tank
. It's the sturdiest case I've made.There are a few areas I need to adjust. Mostly minor aesthetics and ease of assembly things. I might also try eliminating some screws and add some sliding joints.
HardAzRockz
Enthusiast
That turned out great!First prototype for the spit case design for a gnet! (Printed in all my random scraps lol)
I think I over did it... This thing is a tank
There are a few areas I need to adjust. Mostly minor aesthetics and ease of assembly things. I might also try eliminating some screws and add some sliding joints.
Robertguy09
Grand Master
A commissioned case design for this weekend. Aqua Rush!
Download here:
https://www.printables.com/model/1316105-aqua-rush-pcb-case
Download here:
https://www.printables.com/model/1316105-aqua-rush-pcb-case
Robertguy09
Grand Master
I'm actually done with the design.So nice wooaaw your job is so Nicei am waiting the case for puyo puyo 2
I am just waiting to do some test prints of the logo before I upload. My printer has been busy for the past couple of weeks, so I just haven't had time to print this.
Maybe this weekend or next week.
CoinFeeder
Professional
Same just happened to me. So close though!These are awesome!
I was about to print that GNet case when I discovered it’s too big for my Bambu X1C.I squandered my spousal gadget forgiveness on cabs, so maybe I’ll order a print from CraftCloud3D or something and hope it’s not terrible.
9999 Damage
Grand Master
For Gnet? I'm happy for you, knowing what you'll find when you read the rest of the thread!
CoinFeeder
Professional
I did and I'm waiting patiently
Scarletspeedstr
Enthusiast
Thanks again, I’m having fun getting my PCBs housed.
Robertguy09
Grand Master
Very nice remix!! I love the color choices!Thanks again, I’m having fun getting my PCBs housed.
And you are very welcome! I've been having a good time designing and sharing the designs in my spare time
. After I wrap up on the split G-Net case and Puyo Puyo 2, I think I'm going to start knocking out the Psikyo SH2 games I have.
Robertguy09
Grand Master
You mean like an A and B shell? Or like something similar to Jasen's cases for multis?