What's new
Joined
Oct 26, 2016
Messages
37
Reaction score
27
Location
USA
Hi all. I recently picked up a Bloxeed PCB (Sega System C2) and I haven't been able to get the sound working. I've fiddled with the volume pot without any luck, and cleaned the JAMMA edge. I'm using a HAS 3.1 supergun and haven't run into this problem before. I tried Googling but wasn't able to find anything. Any idea if I'm missing something, or does it sound like the audio is busted?
 

Ace`

Student
Joined
Nov 1, 2016
Messages
47
Reaction score
20
Location
Essex, England
Did you get to the bottom of this? I've got the exact same issue. I can hear audio going into the amp using an audio probe but nothing is coming out of the amp. I assumed the amp was bad so replaced it but that didn't fix it, the output isn't shorted so I'm stumped.
 
Joined
Oct 26, 2016
Messages
37
Reaction score
27
Location
USA
Did you get to the bottom of this? I've got the exact same issue. I can hear audio going into the amp using an audio probe but nothing is coming out of the amp. I assumed the amp was bad so replaced it but that didn't fix it, the output isn't shorted so I'm stumped.
Unfortunately not. I still have the board so I might get back to it one day. Let me know if you get this sorted out.
 
Top