Not expected but let me look into it and get back to you@kuze are my findings related to sprites expected so far? or is something wrong with my setup?
Not expected but let me look into it and get back to you@kuze are my findings related to sprites expected so far? or is something wrong with my setup?
Cool, thanks.Not expected but let me look into it and get back to you

Yes, these are unencrypted sets and work on unmodded boards. Myself, i only have the reset line wired.Do these work if you can only run the decrypted romsets on the darksoft board? My board had issues converting to the version that runs encrypted roms, so i am still using decrypted romsets.

I don't think Kuze or Asure are in this one for the money, i think most of us assumed it was long gone anyways , thus more co-operation has been going on.This thread is from 2018. Some users dont visit this forum anymore. Before someone expects some economic commitment, the pledges need to be confirmed again.
Exactly right, I’m not looking for any money and @Asure said the same. Also there is likely much less demand for this now that the CPS1 multi is available, but we just wanted to see this through anyways.I don't think Kuze or Asure are in this one for the money, i think most of us assumed it was long gone anyways , thus more co-operation has been going on.
Exactly right, I’m not looking for any money and @Asure said the same. Also there is likely much less demand for this now that the CPS1 multi is available, but we just wanted to see this through anyways.
To prevent any confusion maybe best to close this thread and move discussion to the other one here?
I’ve been working on this for quite some time and finally have an initial release ready:
https://github.com/kuzearcade/CPS15_to_CPS2
Note that most of my real hardware testing has been with The Punisher but numerous full game runs have been done start to finish in MAME. I’m opening this up for community testing and will work out any bugs that turn up.
All CPS 1.5 sets are supported and this was put together fresh from the ground up.
Also @Asure has been using a different method and has some great results here: https://github.com/Asure/CPSconverter
Cheers!
- kuze
- cadillacs capcom conversion cps1.5 cps2 dinosaurs patch punisher tool
- Replies: 13
- Forum: Project Showcase
I have a fix for the issue @aha2940 reported but I need to do testing on hardware before confirming. It’s too much hassle testing on the cab so need to dig out my supergun setup for the rest of hardware testing from here.