What's new
By:

Building my first test bench

ShootTheCore said:
The harness you linked to has a CPS1 kick harness connector, so you'd need to purchase their additional adapter to use it with your CPS2 boards:
https://www.tops-game.jp/products/detail.php?product_id=2564

If your purchase both of those from Tops then you'll have what you need, but that's $100 plus shipping for both of them. Ugh.
Click to expand...
Yah that seems to be a bit much. This is the connector that came with my Raijin. Is this all I need to run CPS1 boards? For CPS2 boards, I will need to have a kick harness attached to it. The same connector can play both boards right? I just don’t use the kick harness when playing CPS1 boards.
B5B6F8D0-50D7-4D60-97CA-972FB8F18778.jpeg
 
That harness doesn't have any kick harness wired into it so it'll work for any JAMMA game (including CPS1 and CPS2) with up to 4 buttons.

You can fire up and play CPS1 and CPS2 6 button fighting games too - it's just the kick buttons won't work (that's why the 6 button additional connector is called the kick harness).
 
ShootTheCore said:
That harness doesn't have any kick harness wired into it so it'll work for any JAMMA game (including CPS1 and CPS2) with up to 4 buttons.

You can fire up and play CPS1 and CPS2 6 button fighting games too - it's just the kick buttons won't work (that's why the 6 button additional connector is called the kick harness).
Click to expand...
Oh! ok. So MegaMan will work with it but my street fighter won’t. I though I was missing something because when I first tested my Rockman 1, I put it in my friends assault cabinet which was just a Jamma connector with no kick harness, just to see if it worked. Thanks! Now I still want to get a connector with a kick harness but for now, how do I install an inline volt meter on the connector I already have? Is it just as simple as soldering a few wires?
 
You must log in or register to reply here.
Back
Top