CCC: M302NEO Adapter (Micro Edition) - Interest Check / Wait List - OPEN FOR ORDERS

[djsheep]

This adapter is designed specifically for use with the DB9 version of the 8bitdo M30 2.4GHz Wireless Controller which, in our opinion, is the lowest lag and best performing pad to pair with a Supergun.

FEATURES:
Full 6-Button Support with switches to map/swap top/bottom row on controller.
Coin Button mapped to Select/Mode Button.
Pressing Start + any Player Button for 1-second enables/disables autofire.

Adapter connects to your Supergun's DB15 connector on one end and the other end to the M30's DB9 Dongle.

Genuine SEGA 6-Button wired pads have been tested work without any issue.

A Candy Cab Club production.

NOTE: This adapter will ONLY work with the micro-USB version of the M30 pad. Newly released USB-C versions of the M30 are not supported due to polling and power issues that 8bitdo have failed to acknowledge and address.

WAIT LIST:
@GeorgeSpinner x 2 - PAID & SHIPPED
@PolloLoco x 2 - PAID & SHIPPED
@RynoW x 2 - PAID & SHIPPED
@Dex74 x 2 - PAID & SHIPPED

 

[Kujako]

Definitely interested, my efforts for something similar are in my ever growing pile of neglected projects.

 

[Neodogg]

Nice!

 

[Big_P Big_p]

Great project, by good peeps, get behind it. 6 button MD controllers are the shizzle.

 

[astro_zombie138]

Fantastic project, great controller! Sign me up!

 

[GeorgeSpinner]

Interested

 

[tika]

Interested in a couple!

 

[bodgit]

I would probably take a couple, always good to have options. I've got some Retrobit 2.4 GHz Sega controllers and they don't reliably handshake for 6 button, in fact I think they go into some sort of Master System mode. I forget how the negotiation works but there's definitely some sort of smarts involved.

Although I am going to have to put my pedant hat on here, it's DA15 and DE9

 

[PolloLoco]

Absolutely interested in this - looking forward to seeing it develop!

 

[9999 Damage]

Interested x2

 

[CoinFeeder]

Woot! Definitely interested, 2x as well please

 

[GumGum]

interested x2

 

[glstar]

interested too

 

[Dex74]

interested - x2

 

[djsheep]

I’ll chase up where we’re at, at the moment. The hardware is done. It’s just the code needs to be completed and tested. Hopefully not too long.

 

[SNK-NEO-GEO]

Not sure how I missed this one.. interested in 2 if available.. thanks

 

[djsheep]

If anyone else wants to be added to the list just ping with message below.

People who have already expressed interest, I have updated first post with a list, if you want more units or change you mind, just let us know.

Are people keen for the manual switches to adjust button placement from top/row to bottom on the pcb? Or would you prefer software based implementation.

Personally, I like the switches... allows for more on the fly customisation and ability to eye off at a glance where you're at.

 

[hoagtech]

I would like one please. And feel free to share to a HAS configuration if available

 

[Kujako]

Definitely still interested, think I prefer the switches as well. Software settings always run afoul of keeping track of what app/tool to use with which device.

 

[djsheep]

Definitely still interested, think I prefer the switches as well. Software settings always run afoul of keeping track of what app/tool to use with which device.

I’ll have some updates tomorrow. Hopefully have a solid release candidate on prelim. software, then order the hardware finals and take orders. Fingers crossed.

Added you to list @hoagtech