CCC: M302NEO Adapter (Micro Edition) - Interest Check / Wait List - OPEN FOR ORDERS

[GeorgeSpinner]

The process for the dongles is just connect and it shows up as a USB drive. Drag and drop the firmware. That's it.

But this time I could not get it to show up as a USB drive. I tried 4 different PCs.

I'll try one of my older receivers later today.

 

[GeorgeSpinner]

My older m30 receiver (came with micro USB controller) is model MD24G/V6.

That one appears as a USB drive just fine. I'm running firmware v2.0. I think that's old but it's working so I am not upgrading it.

8bit do Genesis BT adapter works fantastic when the controllers are in the mode with 1 light (mode B + START).

 

[djsheep]

@PolloLoco, @RynoW, @Dex74: Checking in with you guys for any thoughts on the adapters and if you ran into any issues, etc?

 

[PolloLoco]

Trying to get my gaming corner set up again, will definitely post some feedback when I can (pesky IRL stuff keeps getting in the way )

 

[RynoW]

@PolloLoco, @RynoW, @Dex74: Checking in with you guys for any thoughts on the adapters and if you ran into any issues, etc?

Finally got around to testing mine with some Third Strike via a HAS v5.1 supergun. Works like a dream with my M30 2.4G (microUSB model). I also tested with two Krikzz Joyzz 2.4GHz controllers and they worked very well as well. Didn't experience any latency or missed inputs. Everything felt just right.

It's really a lovely device.

 

[djsheep]

Have another small batch of these being made up. If anyone needs, send me a PM and I'll add you to the list before they hit the store.

 

[djsheep]

Have a handful of these put aside for forum members. PM me to order directly!

 

[djsheep]

Bump. Have 7 of these left and won’t be making them again.

Get wireless M30 action on your HAS or Minigun.

Also useful for 4P games, especially for P3 and P4 when playing on a cab for example. No wires to worry about.