Console JAMMAizer! Easily connect home consoles to your JAMMA arcade cabinet.

[JohnRambo'sKnife]

Forgive me, I completely overlooked the standoffs when I removed the device from it's original box. It sits fine with them in place and the RJ45 sockets lay flat.

For the aux 4 pin connectors, since I won't be using these, I have removed the white plastic connector housings and will desolder the pins. Should be fine after.

 

[JohnRambo'sKnife]

I had to use some small plastic washers above the standoffs to raise it slightly and a bit longer top screws so it sits flush, but only one aux connector needed to be removed.