Nothing too flashy here. I wanted a stand so that I can store unused control panels (while still populated) safely and not have them take up a ton of room. I whipped up these little easels and they have been working as intended. There are two versions V2 and V5. V2 has less clearance; it's fine for 1L CPs. V5 has ~20mm (I can't remember exactly) from the bottom of the CP to the bottom of the easel. I added the height so that the 2L CP can rest on the easel without touching the ground/table since the easels have to sit on the far outsides of the CP in order to not hit buttons or joysticks.
I'm sure there are more elegant ways to make these and/or a more robust solution; but they do the trick ¯\_(ツ)_/¯.
Files are here: https://www.thingiverse.com/thing:5446629
I'm sure there are more elegant ways to make these and/or a more robust solution; but they do the trick ¯\_(ツ)_/¯.
Files are here: https://www.thingiverse.com/thing:5446629