traplicious
Beginner
One of my New Year’s resolutions this year was to get the crt in my 2 slot working and here I am getting around to it in Feb! Not bad
I purchased this cab nonworking a few years ago and have had it running with a lcd. Time to restore it to its proper glory.
I believe the issue lies with the isolation transformer. I am going to install a new power supply bc the one that’s in there is filthy and I started really taking a look at the iso.
One of the ground connector connects isn’t connected to anything. I believe that’s part of the problem. I looked around to see if there’s a connection point that it slipped off of but can’t find any.
Can some take a look at these pics and see if they can see anything that sticks out as the problem? Thanks!
I purchased this cab nonworking a few years ago and have had it running with a lcd. Time to restore it to its proper glory.
I believe the issue lies with the isolation transformer. I am going to install a new power supply bc the one that’s in there is filthy and I started really taking a look at the iso.
One of the ground connector connects isn’t connected to anything. I believe that’s part of the problem. I looked around to see if there’s a connection point that it slipped off of but can’t find any.
Can some take a look at these pics and see if they can see anything that sticks out as the problem? Thanks!
Attachments
-
671AC0EA-3725-4411-BB2C-5C4C28DECF04.jpeg155.1 KB · Views: 70
-
194DB6E7-903F-4EAA-BF25-DE85E92D9061.jpeg164 KB · Views: 68
-
5705EA61-EF5E-4A50-B99C-2BFD4DC5F413.jpeg174.8 KB · Views: 86
-
05ABD1C9-100F-4B2D-8051-0E946B6457AA.jpeg148.9 KB · Views: 71
-
B268504A-0EF0-4B93-A1A3-A5E7A950B017.jpeg161.9 KB · Views: 67