FOUND CPS1.5 mounting feet

[JohnRambo'sKnife]

Need a set of 4. Thanks

 

[Sp33dFr34k]

Bit of a long shot maybe, but you never know:

FS Thread 'Cps1.5 & CPS2 clips and mounting feet'

Feb 16, 2023

Hey all, got some spare bits I no longer need.
CPS2 clips (for holding the A/B boards) $10 / pair I have 5
CPS2 mounting feet $10 for the pair
Cps1.5 feet $50 for the set of 4

• bartre
• Replies: 1
• Forum: Arcade PCBs and Carts

 

[JohnRambo'sKnife]

Thanks.

Sent them a message. Read it. No reply.

 

[snakeGrave]

these are different than the cps2 clips?

 

[JohnRambo'sKnife]

Yes. They use a circular hole for the indent to hold them to the board versus the square hole on the CPS2 feet.

 

[JohnRambo'sKnife]

Bump

 

[JohnRambo'sKnife]

Still looking

 

[ack]

Did you have an interested in non-original but functional ones? I was in need of a set and have been curious about metal fab/bending with sendcutsend.com and took a stab at making replacement ones. The silver ones are from sendcutsend and the goldish ones are original.

Forum isn't letting me upload this picture

https://www.mvs-scans.com/misc/IMG_1566-1.JPG

They had some manufacture limitations so I couldn't get an exact replica.

• They won't do 2 bends that close together so the replica's leg is about 2mm taller
• Because the part was so small they wouldn't countersink the screw hole or apply a coating

I only needed 4, but there were price breaks based on quantity ordered. 1 to 9 was around $12 each, 10 to 49 was around $6 each and 50+ was around $3.5 each. So I ended up getting 12 made. You are welcome to a set if you cover cost ($24) + shipping.

 

[JohnRambo'sKnife]

Thank you again @ack. I'll still leave this up in case anyone finds an original set they no longer need.

 

[JohnRambo'sKnife]

Still looking for another set of originals as well.

 

[JohnRambo'sKnife]

Still looking for an original set.

 

[JohnRambo'sKnife]

Bump

 

[ExZX]

I’ll dig mine out

 

[JohnRambo'sKnife]

Thank you!

Should have a deal, so marking this closed.