What's new
By:

CPS1 Multi. Official Thread

No I have no idea about some dpeed related issue.
All the board KOTR that I could found on eBay, yahoo auctions and in arcade shops in Japan were actually 10 Mhz
 
raffy92 said:
Ok I will eventually wait for it
Click to expand...
The wait won't be too long, the new prototype pcbs are in production now and should be here end of this coming week hopefully. We should be able to get them tested/verified a week or so after that. For those that are eager to try this mod we should have enough to sell a few after we test them. We will order a larger batch depending on demand.
 
Just wondering if anyone who ordered from HSS around the last two weeks of April has gotten a shipping notification? Trying to figure out if my order will be shipping soon.
 
dos said:
Just wondering if anyone who ordered from HSS around the last two weeks of April has gotten a shipping notification? Trying to figure out if my order will be shipping soon.
Click to expand...
Please don't mail HSS or SYG asking when your cart will be shipped. They are shipping as fast as they can and you will be notified as soon as they ship yours. If you keep sending them emails asking for an update, that is time that they could spend shipping out carts.
 
Yeah no worries that's why I asked here to get an idea from other users rather than bothering them. If that isn't cool either, let me know and I'll delete it.
 
I mean last few weeks of April was several months after the multi was added for order, so would be surprising if it was shipped to you already.
 
  • Like
Reactions: dos
You know, I just checked and I was way off from when I thought it was released. For some reason I thought it was a space of weeks but yeah, months. They should probably remove the "beginning of May" thing from the order page though because I'm sure there are people out there who would take that very literally and make a thing of it
 
Derick2k said:
Ok, found some crystals to try out the new PCB, so the PCB and crystals are on order, will send them over to Mitsu once they arrive to test them out.

1653017411508.png


So the idea is that it will drop in place of the current crystal


1653017485719.png



Also order some of these to see if they work out or need some further tweaking

1653017579992.png
Click to expand...

Is it just the clock - the 68000 can run at either 10mhz or 12mhz with no issues - on both revisions?

Matt
 
mathewbeall said:
Is it just the clock - the 68000 can run at either 10mhz or 12mhz with no issues - on both revisions?

Matt
Click to expand...
If you have a 12 MHz CPU it will run at the slower rate no problem.

10 to 12 MHz is a 20% overclock. It is by no means guaranteed that every CPU can handle it. That said, the 68000 is a robust chip and many 10 MHz examples will work just fine at the faster speed.

Worst case you can buy a 12 MHz 68000 and drop it in.
 
I received my multi a couple days ago.
Got a chance to stream it this afternoon.
Today I covered the TATE games 1941 CA, and Varth.
Never played Varth, and REALLY enjoyed myself.
Bravo @Mitsurugi-w @Darksoft and gang on a nice piece of kit.

View: https://www.twitch.tv/videos/1490149620


I'll cover the horizontal games this coming Tuesday.
 
Great multi, the only issues I have had so far are that sometimes when I boot a game the graphics are fucked. Usually when I reboot/reload the game everything is fine. This multi is really awesome, can’t wait for a solid case to come out and for Mitsu’s dip switch mods to become available
 
snakeGrave said:
Great multi, the only issues I have had so far are that sometimes when I boot a game the graphics are fucked. Usually when I reboot/reload the game everything is fine. This multi is really awesome, can’t wait for a solid case to come out and for Mitsu’s dip switch mods to become available
Click to expand...

…That’s not normal at all. Check your reset line?
 
I'll snap a photo if it happens again. It has happened to me two times so far, when I booted GnG USA, the game was only showing Arthur's armor on the screen. Then something similar happened again when I booted rainbow edition. I booted up koryu edition and my blast city started spazzing out and my coin counter kept going up. I'll check out my dip settings eventually. TBH I'm having too much fun with GnG to want to remove the multi from my setup.
 
Raining CPS-1 Multiz here.

Most of the remaining Australia / New Zealand orders went out today... expect PM's shortly Boyz and Girlz...

cps_1_1.JPG

cps_1_2.JPG

IMG_8035.JPG

Also, I stacked these boxes up at the post after they were processed. Shortly after snapping the pic, the plexi sneeze protector couldn't handle the weight and came crashing down. The ladies at the post office were not impressed by the Leaning Tower of Multiz...

leaningtowerofmultiz.JPG
 
Okay so I have put some hours into my CP1 Multi and I'm loving it. It's very obvious that A LOT of work went it to making this thing.

We definitely need that dip switch mod, that would be sick. But this is probably the the most awesome retro gaming product I have gotten personally, and it was pretty easy to hook up.

I was thinking of making a case myself for mine out of leaves and sticks and stuff that I could find outside, but I think I'm going to wait and see if anybody starts selling protective cases. I would so buy one because I would rather spend my time playing video games. I'm a fan of ninjas, and lasers and explosions.

One noob ass question, and I'm sure this as been discussed and this info is somewhere that I just missed, but which header on the Multi is for player 1 and player 2 kick harness? Having some trouble getting my kicks to work with my HAS supergun and kick harness. Not even sure if I'm using the right kick harness. All my HAS kick harnesses are all in the same box and I don't know which is which....anyway...

Thanks!
 
You must log in or register to reply here.
Back
Top