Thrillhouse
Enthusiast
Looking to declutter, first on the chopping block are my spare Street Fighter II boards!
Prices are shipped within the contiguous US, no international shipping at this time. F&F preferred, otherwise please add 4% for fees. I have several positive purchases KLOV and can point to a few forum members over there that I've met with personally to vouch!
On to the fun stuff!
-Street Fighter II World Warrior complete CPS1 A+B+C set: $215
Populated with factory "ETC" (Asia) romset. 10MHz A board, appears to have a B-17 C board (sticker is covering most of the chip label). I have tested this set for sound, video, and basic JAMMA controls. I do not have a kick-harness hooked up in any of my cabs to test kick harness buttons.
-Street Fighter II Champion Edition CPS1 B board only:$75 SOLD!
Pretty much same as above - populated with "ETC" (Asia) romset. When I received this, it was on a bad A board with a bad C board (NOT INCLUDED). I tested this B board with another 10MHz A and a generic B-21 C board and it worked fine. I tested this for video, sound, and basic JAMMA controls. My C board didn't have a kick harness plug, and I don't have a kick harness in any of my cabs to test with anyhow!
I would be more willing to make a deal if you want both. Regardless, feel free to shoot me an offer on either. Note, though, that the B-17 C board on the WW set will NOT run the CE B board - you'll need a B-21 C board with kick harness, according to Arcade Otaku. The A board would power both B boards though.
These are listed on other forums as well, just a heads up!
Prices are shipped within the contiguous US, no international shipping at this time. F&F preferred, otherwise please add 4% for fees. I have several positive purchases KLOV and can point to a few forum members over there that I've met with personally to vouch!
On to the fun stuff!
-Street Fighter II World Warrior complete CPS1 A+B+C set: $215
Populated with factory "ETC" (Asia) romset. 10MHz A board, appears to have a B-17 C board (sticker is covering most of the chip label). I have tested this set for sound, video, and basic JAMMA controls. I do not have a kick-harness hooked up in any of my cabs to test kick harness buttons.
-Street Fighter II Champion Edition CPS1 B board only:
Pretty much same as above - populated with "ETC" (Asia) romset. When I received this, it was on a bad A board with a bad C board (NOT INCLUDED). I tested this B board with another 10MHz A and a generic B-21 C board and it worked fine. I tested this for video, sound, and basic JAMMA controls. My C board didn't have a kick harness plug, and I don't have a kick harness in any of my cabs to test with anyhow!
I would be more willing to make a deal if you want both. Regardless, feel free to shoot me an offer on either. Note, though, that the B-17 C board on the WW set will NOT run the CE B board - you'll need a B-21 C board with kick harness, according to Arcade Otaku. The A board would power both B boards though.
These are listed on other forums as well, just a heads up!
Attachments
Last edited:
