What's new
By:

CPS2 Digital AV Designer and Availability

brandon.arnold

brandon.arnold

Student
Joined
Jan 1, 2022
Messages
85
Reaction score
72
Location
Seattle, WA
Hi all. Various Digital AV configurations had been available on videogameperfection.com, but they haven't for a bit. I need another one.

May I ask who designed this board? Also are there any other ways for me to get one, including building one myself provided a parts list?

Thank you!
 
brandon.arnold said:
Hi all. Various Digital AV configurations had been available on videogameperfection.com, but they haven't for a bit. I need another one.

May I ask who designed this board? Also are there any other ways for me to get one, including building one myself provided a parts list?

Thank you!
Click to expand...

Marqs, the creator of the OSSC upscaler, created the CPS Digital board. He’s very active on the Shmups forum if you want to contact him

VideoGamePerfection is operated by his manufacturing partner and unlike the OSSC, the CPS Digital isn’t open source, so VGP is the only official supplier. VGP has their own forums you can ask on as well.
 
ShootTheCore said:
Marqs, the creator of the OSSC upscaler, created the CPS Digital board. He’s very active on the Shmups forum if you want to contact him

VideoGamePerfection is operated by his manufacturing partner and unlike the OSSC, the CPS Digital isn’t open source, so VGP is the only official supplier. VGP has their own forums you can ask on as well.
Click to expand...
It is open sourced though? https://github.com/marqs85/cps2_digiav
I'm currently building one and even asked Marqs some questions a while back. I need to get back to it though.
 
raynex said:
It is open sourced though? https://github.com/marqs85/cps2_digiav
I'm currently building one and even asked Marqs some questions a while back. I need to get back to it though.
Click to expand...
Oh, wow--even better! I see there is an OshPark link and bill of materials linking to Digikey. All the key parts I looked at (including the FPGA chip) are in stock.

I also reached out to Marqs and he said the VGP guy wants to restock in March. If he'd keep them in stock I wouldn't be doing this.
 
Is it any more cost effective to make your own?
I figure with them buying in bulk, it may shake out the same.
Curious since I can solder.
 
ForestOfDreams said:
Is it any more cost effective to make your own?
I figure with them buying in bulk, it may shake out the same.
Curious since I can solder.
Click to expand...
I made one by hand; it was somewhat time-consuming (and I still haven’t managed to get the firmware properly flashed).
https://www.arcade-projects.com/thr...f-cyclone-10-fpga-chips-to-make-my-own.17896/

If I was doing it again I’d use one of those low-cost PCB assembly services to do the heavy lifting and just do the unusual stuff myself
 
You must log in or register to reply here.
Back
Top