PascalP
Legendary
Anyone in Europe have some spare pins for the old/non-champion CPS2 multiboard?
Looking for at least a few long pins for the main board, but if someone has some spare short pins for the small PCB I will take some as well.
A dozen or so of each will be more than sufficient
According to Mitsu it should be these pins:
Looking for at least a few long pins for the main board, but if someone has some spare short pins for the small PCB I will take some as well.
A dozen or so of each will be more than sufficient
According to Mitsu it should be these pins:
- High pins are BBS-132-T-C from SAMTEC; They can be bough i.e. from here: https://www.mouser.com/ProductDetail/Samtec/BBS-132-T-C?qs=0lQeLiL1qyarkSqHAN79VA==&mgh=1&vip=1
- Low pins for program ROM PCB were bought from HK Kemei Electronics and the part number is KM1004. However, minimum order is *sigh* 1000 units.
Last edited: