WTB CPS2 multi pins (long pins for main board)

[PascalP]

Anyone in Europe have some spare pins for the old/non-champion CPS2 multiboard?
Looking for at least a few long pins for the main board, but if someone has some spare short pins for the small PCB I will take some as well.
A dozen or so of each will be more than sufficient

According to Mitsu it should be these pins:

• High pins are BBS-132-T-C from SAMTEC; They can be bough i.e. from here: https://www.mouser.com/ProductDetail/Samtec/BBS-132-T-C?qs=0lQeLiL1qyarkSqHAN79VA==&mgh=1&vip=1
• Low pins for program ROM PCB were bought from HK Kemei Electronics and the part number is KM1004. However, minimum order is *sigh* 1000 units.

 

[PascalP]

Bumping this, otherwise I will order some high pins myself, just need to find a fix for the low pins

 

[djsheep]

Paging @Darksoft

 

[Darksoft]

Bumping this, otherwise I will order some high pins myself, just need to find a fix for the low pins

You can find them in many places, for example here: https://pl.aliexpress.com/item/1005005875967853.html

@Tailsnic Retroworks bought some recently. He can provide a link to his.

 

[Tailsnic Retroworks]

Yeah, this exact link has so many types:

https://a.aliexpress.com/_EjzutMm

 

[PascalP]

cool, never thought of looking for them on Ali, just had the info they came by the 1000

Will order some from Ali then, cheers guys!

 

[PascalP]

Anyone have an alternate link to the long pins as well?
The short ones have arrived already from Aliexpress!

• High pins are BBS-132-T-C from SAMTEC; They can be bough i.e. from here: https://www.mouser.com/ProductDetail/Samtec/BBS-132-T-C?qs=0lQeLiL1qyarkSqHAN79VA==&mgh=1&vip=1

I can get them from Mouser, Digikey, RS components, Farnell etc.
But all quote me over €30 due to shipping for €5 worth of parts, so if anyone has some spare? @CPZ - SAVEYOURGAMES or @xodaraP perhaps?

 

[xodaraP]

I’ll check but I think I used all the spares I had

How many do you need?

 

[PascalP]

I’ll check but I think I used all the spares I had

How many do you need?

I think they come in a single row of 32?
I only would need 1 row, or if you have a partial row left then about 5-6 pins in a row would be sufficient