kinooshi823
Professional
I have an older version of Darksoft complete with 5 ram sticks. I put them on, and I get this screen below. I removed all the ram and I do get a picture of the cps3 telling me that ram is needed on the pcb. Now, could it be bad ram? what I did is add a stick of ram once and then turn on and got the same there is not enough ram on the pcb. When I added the final one, I get the picture seen below. I did mix up some ram with the original and the darksoft but still got a screen similar to the one below. Any help here? I cleaned contacts, dedusted the board and such. I am stumped.